Epson C88+ feeding straight

  • Thread starter Thread starter Dave
  • Start date Start date
D

Dave

My C88+ is feeding paper at an angle so that printing is slanted
noticeably to the right. Anyone have this problem and have a cure
(aside from another printer)?

Thanks,
 
Dave said:
My C88+ is feeding paper at an angle so that printing is slanted
noticeably to the right. Anyone have this problem and have a cure
(aside from another printer)?

Thanks,
Click to expand...

Yeah, that's a common problem, well sort of, you must be sure that the
sliding paper guide is tight against edge of the paper.
At least that what we've come to notice.
Frank
 
Frank said:
Yeah, that's a common problem, well sort of, you must be sure that the
sliding paper guide is tight against edge of the paper.
At least that what we've come to notice.
Frank
Click to expand...
Also - check to be sure that nothing has fallen into or gotten stuck in the
paper feed area. The rollers that feed the paper through can also get a
buildup of dust or lint from paper and might need to be cleaned.
 
Burt said:
Also - check to be sure that nothing has fallen into or gotten stuck in
the paper feed area. The rollers that feed the paper through can also get
a buildup of dust or lint from paper and might need to be cleaned.
Click to expand...

I've also noticed this happening not only on the C88+ but on a number of
C84's that we use. The only thing I've found to minimize the slanting is
what has been suggested already; to make sure the paper guide is tight up
against the paper. This happens on new machines as well as old.
 
Back
Top