Epson c82 envelope printing

  • Thread starter Thread starter deep
  • Start date Start date
D

deep

HI
I just replaced my epson 600 with an epson c82 and find that it wants to
print envelopes on the left side instead of the right. That doesn't work
because the envelope needs to be guided on both edges. I've contacted epson
with no luck. I am using wordperfect 8 and get the same results with ver
12. Envelope printing works fine with the 600. I've tried updating my
driver with no luck and many other things with no luck. I could not find
any help on the corel sight either.

Has anybody had the same trouble and found a fix???

Thanks
Dee
 
Deep,
I too, went from a 600 to a C82. The thing I miss most about envelope
printing is all envelopes on the 600 could be printed lengthwise including
#10's. Now with the C82 the envelopes have to print vertically. That said, I
use either Microsoft Word or Print Artist to print envelopes and are placed
in the printer on the right. MS Word lets you select the orientation of the
envelope according to what your printer dictates. Are you sure the programs
you are using don't give you the same options?
Good luck.
Don D
 
Deep,
I too, went from a 600 to a C82. The thing I miss most about
envelope
printing is all envelopes on the 600 could be printed lengthwise
including #10's. Now with the C82 the envelopes have to print
vertically. That said, I use either Microsoft Word or Print Artist to
print envelopes and are placed in the printer on the right. MS Word
lets you select the orientation of the envelope according to what your
printer dictates. Are you sure the programs you are using don't give
you the same options?
Good luck.
Don D
Click to expand...

Thanks Don but every thing I've tried in the way of paper size,
orientation, etc results in the printing either at the middle of a
standard page or off to the left. I got a step by step fix from epson,
but it evidently was for a WP version other than 8 or 12.

Dee
 
deep said:
HI
I just replaced my epson 600 with an epson c82 and find that it wants to
print envelopes on the left side instead of the right. That doesn't work
because the envelope needs to be guided on both edges. I've contacted epson
with no luck. I am using wordperfect 8 and get the same results with ver
12. Envelope printing works fine with the 600. I've tried updating my
driver with no luck and many other things with no luck. I could not find
any help on the corel sight either.

Has anybody had the same trouble and found a fix???

Thanks
Dee
Click to expand...
I didn't have the exact problem you have, but I am using the same Epson
printer and Word 97 to print envelopes. The problem I had is that no matter
which orientation I had chosen, the return address would always be printed
on the top center. I couldn't figure out what I was doing wrong. I put the
envs in the printer per the instruction manually. In Word and the Epson
printers settings I had chosen #10 envelope and landscape mode, but no
matter which orientation I had chosen in Word the results were always the
same. In the end in turned out that I need to go into the page layout
settings and chose the envelope size in the reduce/enlarge size option.
So if by the time this response appears and you have not resolved the issue,
you may want to try tinkering around with some of the advanced settings in
the Epson printer settings.
 
Back
Top