Epson Aculaser C2000

  • Thread starter Thread starter Mike Page
  • Start date Start date
M

Mike Page

Does anyone in this group know how to set up the C2000 to print over TCP/IP.
Our PCs are all set up correctly, but the settings on the printer were
re-set and now it will only print as a local printer. Any help greatly
appreciated.
 
On Wed, 29 Oct 2003 16:01:04 +0000 (UTC), Mike Page wrote:

=>Does anyone in this group know how to set up the C2000 to print over TCP/IP.
=>Our PCs are all set up correctly, but the settings on the printer were
=>re-set and now it will only print as a local printer. Any help greatly
=>appreciated.

This sounds like an OS or Network issue. The printer itself
has no say in how data gets to it. Try posting in a NG for
your OS and/or your network OS.
 
Thanks, I'll give it a try.

There are settings on the Aculaser for IP number and various other network
parameters, I'll explore the OS issue too though.
 
On Thu, 30 Oct 2003 09:11:30 +0000 (UTC), Mike Page wrote:

=>Thanks, I'll give it a try.
=>
=>There are settings on the Aculaser for IP number and various other network
=>parameters, I'll explore the OS issue too though.

Sorry, my answer was incomplete: a printer does have a say
in how it _receives_ the data. :-) But even if the IP etc
are set correctly on the printer, you may still have a
problem getting the network to recognise them, or granting
proper permissions to users, or both.

Good luck!
 
Back
Top