Epson 960 2880 Max Resolution

  • Thread starter Thread starter pencilcup
  • Start date Start date
P

pencilcup

My Epson 960 states that it has a max printing resolution of 2880 x
1440 dpi. However, when I goto the printer driver properties in
Windows, I can only select 1440 and 720 DPI for photo prints. Can
someone please explain this?

Thanks.
 
My Epson 960 states that it has a max printing resolution of 2880 x
1440 dpi. However, when I goto the printer driver properties in
Windows, I can only select 1440 and 720 DPI for photo prints. Can
someone please explain this?

Thanks.
Click to expand...
Depending on the paper type you select, certain settings will not be
available. I dont think 2880 is avail on anything but glossy

Note that it is the very rare individual that sees any difference
between 1440 and 2880---except that 2880 uses more ink.
**************************
Mark Herring, Pasadena, Calif.
Private e-mail: Just say no to "No".
 
Mark Herring said:
Depending on the paper type you select, certain settings will not be
available. I dont think 2880 is avail on anything but glossy

Note that it is the very rare individual that sees any difference
between 1440 and 2880---except that 2880 uses more ink.
Click to expand...

If it used more ink then the prints would be denser! They are not, and
that is a popular misconception. They use virtually the same amount of
ink in finer, smaller dots.
 
Depending on the paper type you select, certain settings will not be
available. I dont think 2880 is avail on anything but glossy

Note that it is the very rare individual that sees any difference
between 1440 and 2880---except that 2880 uses more ink.
Click to expand...

Also note that this model does not permit more then 1440 dpi when
borderless printing is activated.
I find the 2880 setting a little less grainy, but the difference is subtle.
Regards,

Luca
 
If it used more ink then the prints would be denser! They are not, and
that is a popular misconception. They use virtually the same amount of
ink in finer, smaller dots.
Click to expand...
Wellllllll.......
I read that somewere and it made sense. But you do have a point.

in my testing 1440 is darker than 720, but 2880 is little different.

I thought that the dots were always about the same, and the different
dpi setting controlled the number and spacing of the printing passes.
**************************
Mark Herring, Pasadena, Calif.
Private e-mail: Just say no to "No".
 
Wellllllll.......
I read that somewere and it made sense. But you do have a point.
Click to expand...
Well, you know what they say about believing everything you read. ;-)
In fairness, you are not the first to say it and certainly won't be the
last - it was a common view when the printers first appeared. Some
folks on the Epson mailing list have actually measured the ink
consumption at the higher dot resolution and proved its the same that
way.
in my testing 1440 is darker than 720, but 2880 is little different.

I thought that the dots were always about the same, and the different
dpi setting controlled the number and spacing of the printing passes.
Click to expand...

No, most of the Epson printers from the past couple of years handle at
least three different dot sizes, although the manuals and specifications
only ever mention the smallest. You need to find the complete service
manual to find out what the larger dot sizes are. The printer driver
will use these larger dots for lower resolutions and also to block fill
large areas of the same colour, such as synthetic images - charts and
diagrams etc. The highest resolution that any Epson printer will
achieve is 720ppi in each axis (large format professional Epsons limit
at 360ppi), irrespective of the stated dot density. This is the native
resolution of the printer driver and the higher dot resolution merely
permits finer colours to be represented at that resolution.
 
Back
Top