enter the ProductID

  • Thread starter Thread starter Martin
  • Start date Start date
M

Martin

Hi, When I install a new client with RIS-installation I
need to enter the ProductID at the first start up, is it
away to do this automatic? ripep.sif?
It is a WinXP install.

/Martin
 
Hi!


Add to the file RISTNDRD.SIF
(..\RemoteInstall\Setup\..\Images\..\i386\templates) to
section
[UserData]
ProductID = "XXXXX-XXXXX-XXXXX-XXXXX-XXXXX"



Deploy.chm and ref.chm from deploy.cab on your XP CD will
make you day ;)

Cheers
Aatu
 
Hi Aatu.
Thanks for fast and good answer!
It is just one problem, I don't have the RISTNDRD.SIF in
my templates catalogue.
BUT, I have it in other image catalogue, but not the ones
with plain windows.
Any ide?
What about the deploy.chm and ref.chm????
-----Original Message-----
Hi!


Add to the file RISTNDRD.SIF
(..\RemoteInstall\Setup\..\Images\..\i386\templates) to
section
[UserData]
ProductID = "XXXXX-XXXXX-XXXXX-XXXXX-XXXXX"



Deploy.chm and ref.chm from deploy.cab on your XP CD will
make you day ;)

Cheers
Aatu

-----Original Message-----
Hi, When I install a new client with RIS-installation I
need to enter the ProductID at the first start up, is it
away to do this automatic? ripep.sif?
It is a WinXP install.

/Martin

.
Click to expand...
.
Click to expand...
 
Hi Martin!

Please repost complete path to your "plain" windows image
that do not include ristnrd.sif file if it is different
from what I erlier posted as an example. I can't
understand how it possible that the file is missing....

From the ref.chm file under unattend.txt (winnt.sif) you
find all the sections and options you can use in your sif
file. ie you can under [Components] exclude games, MSN
Explorer etc and remove visible points to Outlook if it's
not your companys primary email reader.
I think it's worth reading those help files :)

Cheers
Aatu

-----Original Message-----
Hi Aatu.
Thanks for fast and good answer!
It is just one problem, I don't have the RISTNDRD.SIF in
my templates catalogue.
BUT, I have it in other image catalogue, but not the ones
with plain windows.
Any ide?
What about the deploy.chm and ref.chm????
-----Original Message-----
Hi!


Add to the file RISTNDRD.SIF
(..\RemoteInstall\Setup\..\Images\..\i386\templates) to
section
[UserData]
ProductID = "XXXXX-XXXXX-XXXXX-XXXXX-XXXXX"



Deploy.chm and ref.chm from deploy.cab on your XP CD will
make you day ;)

Cheers
Aatu

-----Original Message-----
Hi, When I install a new client with RIS-installation I
need to enter the ProductID at the first start up, is it
away to do this automatic? ripep.sif?
It is a WinXP install.

/Martin

.
Click to expand...
.
Click to expand...
.
Click to expand...
 
Hi.
Oh I see, the ristnrd.sif should be in the 2plain" windows
image. Then I have the file. I will try if its work later
today! Thanks again!
/Martin
-----Original Message-----
Hi Martin!

Please repost complete path to your "plain" windows image
that do not include ristnrd.sif file if it is different
from what I erlier posted as an example. I can't
understand how it possible that the file is missing....

From the ref.chm file under unattend.txt (winnt.sif) you
find all the sections and options you can use in your sif
file. ie you can under [Components] exclude games, MSN
Explorer etc and remove visible points to Outlook if it's
not your companys primary email reader.
I think it's worth reading those help files :)

Cheers
Aatu

-----Original Message-----
Hi Aatu.
Thanks for fast and good answer!
It is just one problem, I don't have the RISTNDRD.SIF in
my templates catalogue.
BUT, I have it in other image catalogue, but not the ones
with plain windows.
Any ide?
What about the deploy.chm and ref.chm????
-----Original Message-----
Hi!


Add to the file RISTNDRD.SIF
(..\RemoteInstall\Setup\..\Images\..\i386\templates) to
section
[UserData]
ProductID = "XXXXX-XXXXX-XXXXX-XXXXX-XXXXX"



Deploy.chm and ref.chm from deploy.cab on your XP CD will
make you day ;)

Cheers
Aatu


-----Original Message-----
Hi, When I install a new client with RIS-installation I
need to enter the ProductID at the first start up, is it
away to do this automatic? ripep.sif?
It is a WinXP install.

/Martin

.

.
Click to expand...
.
Click to expand...
.
Click to expand...
 
Hi.
Oh I see, the ristnrd.sif should be in the 2plain" windows
image. Then I have the file. I will try if its work later
today! Thanks again!
/Martin
-----Original Message-----
Hi Martin!

Please repost complete path to your "plain" windows image
that do not include ristnrd.sif file if it is different
from what I erlier posted as an example. I can't
understand how it possible that the file is missing....

From the ref.chm file under unattend.txt (winnt.sif) you
find all the sections and options you can use in your sif
file. ie you can under [Components] exclude games, MSN
Explorer etc and remove visible points to Outlook if it's
not your companys primary email reader.
I think it's worth reading those help files :)

Cheers
Aatu

-----Original Message-----
Hi Aatu.
Thanks for fast and good answer!
It is just one problem, I don't have the RISTNDRD.SIF in
my templates catalogue.
BUT, I have it in other image catalogue, but not the ones
with plain windows.
Any ide?
What about the deploy.chm and ref.chm????
-----Original Message-----
Hi!


Add to the file RISTNDRD.SIF
(..\RemoteInstall\Setup\..\Images\..\i386\templates) to
section
[UserData]
ProductID = "XXXXX-XXXXX-XXXXX-XXXXX-XXXXX"



Deploy.chm and ref.chm from deploy.cab on your XP CD will
make you day ;)

Cheers
Aatu


-----Original Message-----
Hi, When I install a new client with RIS-installation I
need to enter the ProductID at the first start up, is it
away to do this automatic? ripep.sif?
It is a WinXP install.

/Martin

.

.
Click to expand...
.
Click to expand...
.
Click to expand...
 
Your welcome.
-----Original Message-----
Hi.
Oh I see, the ristnrd.sif should be in the 2plain" windows
image. Then I have the file. I will try if its work later
today! Thanks again!
/Martin
-----Original Message-----
Hi Martin!

Please repost complete path to your "plain" windows image
that do not include ristnrd.sif file if it is different
from what I erlier posted as an example. I can't
understand how it possible that the file is missing....

From the ref.chm file under unattend.txt (winnt.sif) you
find all the sections and options you can use in your sif
file. ie you can under [Components] exclude games, MSN
Explorer etc and remove visible points to Outlook if it's
not your companys primary email reader.
I think it's worth reading those help files :)

Cheers
Aatu

-----Original Message-----
Hi Aatu.
Thanks for fast and good answer!
It is just one problem, I don't have the RISTNDRD.SIF in
my templates catalogue.
BUT, I have it in other image catalogue, but not the ones
with plain windows.
Any ide?
What about the deploy.chm and ref.chm????

-----Original Message-----
Hi!


Add to the file RISTNDRD.SIF
(..\RemoteInstall\Setup\..\Images\..\i386\templates) to
section
[UserData]
ProductID = "XXXXX-XXXXX-XXXXX-XXXXX-XXXXX"



Deploy.chm and ref.chm from deploy.cab on your XP CD will
make you day ;)

Cheers
Aatu


-----Original Message-----
Hi, When I install a new client with RIS-installation I
need to enter the ProductID at the first start up, is it
away to do this automatic? ripep.sif?
It is a WinXP install.

/Martin

.

.

.
Click to expand...
.
Click to expand...
.
Click to expand...
 
Hi again.
I did not work :(
nothing special happened when i installed WinXP, I had to
enter the productID. I also noticed that the FullName
= "xxx" didn't work either. I didn't change the xxx value
yesterday...
/Martin
-----Original Message-----
Your welcome.
-----Original Message-----
Hi.
Oh I see, the ristnrd.sif should be in the 2plain" windows
image. Then I have the file. I will try if its work later
today! Thanks again!
/Martin
-----Original Message-----
Hi Martin!

Please repost complete path to your "plain" windows image
that do not include ristnrd.sif file if it is different
from what I erlier posted as an example. I can't
understand how it possible that the file is missing....

From the ref.chm file under unattend.txt (winnt.sif) you
find all the sections and options you can use in your sif
file. ie you can under [Components] exclude games, MSN
Explorer etc and remove visible points to Outlook if it's
not your companys primary email reader.
I think it's worth reading those help files :)

Cheers
Aatu


-----Original Message-----
Hi Aatu.
Thanks for fast and good answer!
It is just one problem, I don't have the RISTNDRD.SIF in
my templates catalogue.
BUT, I have it in other image catalogue, but not the ones
with plain windows.
Any ide?
What about the deploy.chm and ref.chm????

-----Original Message-----
Hi!


Add to the file RISTNDRD.SIF
(..\RemoteInstall\Setup\..\Images\..\i386\templates) to
section
[UserData]
ProductID = "XXXXX-XXXXX-XXXXX-XXXXX-XXXXX"



Deploy.chm and ref.chm from deploy.cab on your XP CD
will
make you day ;)

Cheers
Aatu


-----Original Message-----
Hi, When I install a new client with RIS-
Click to expand...
installation
I
need to enter the ProductID at the first start up, is
it
away to do this automatic? ripep.sif?
It is a WinXP install.

/Martin

.

.

.

.
Click to expand...
.
Click to expand...
.
Click to expand...
 
Hi Martin!

B2B = Back to basics;
You did install your RIS service using a Volume Lisence XP
CD? Single Lisence and OEM lisense are not usable here!

Here is an example of a sif file. Compare to your own or
copy/paste sections of this to a new sif file on your RIS
server. Change ProductID, path, names etc.

Cheers
Aatu

[data]
floppyless = "1"
msdosinitiated = "1"
OriSrc = "\\%SERVERNAME%\RemInst\%INSTALLPATH%\%
MACHINETYPE%"
OriTyp = "4"
LocalSourceOnCD = 1

[SetupData]
OsLoadOptions = "/noguiboot /fastdetect"
SetupSourceDevice = "\Device\LanmanRedirector\%SERVERNAME%
\RemInst\%INSTALLPATH%"

[Unattended]
OemPreinstall = yes
Oempnpdriverspath = "Drivers\nic;Drivers\vga;Drivers\audio"
DriverSigningPolicy = ignore
FileSystem = LeaveAlone
ExtendOEMPartition = 0
TargetPath = \WINDOWS
OemSkipEula = yes
InstallFilesPath = "\\%SERVERNAME%\RemInst\%INSTALLPATH%\%
MACHINETYPE%"
LegacyNIC = 1
AutoActivate = yes
ActivateProxy = Proxy

[Proxy]
Proxy_Enable = 1
Use_Same_Proxy = 1
HTTP_Proxy_Server = OurProxyServer
Proxy_Override =

[Components]
msnexplr = Off
msmsgs = off
OEAccess = Off
WMAccess = Off
accessopt = Off
chat = Off
dialer = Off
fax = Off
freecell = Off
hearts = Off
minesweeper = Off
pinball = Off
solitaire = Off
spider = Off
zonegames = Off

[UserData]
FullName = "UserName"
OrgName = "OurOrganization"
ComputerName = %MACHINENAME%
ProductID = "OURVO-LUMEL-ICENS-ENUMB-ER123"

[GuiUnattended]
OemSkipWelcome = 1
OemSkipRegional = 1
TimeZone = %TIMEZONE%
AdminPassword = "*"

[RegionalSettings]
;InputLocale = 1035:040b

[Display]
BitsPerPel = 16
XResolution = 1024
YResolution = 768
VRefresh = 70

[Shell]
defaultstartpaneloff = yes
defaultthemesoff = yes

[Networking]

[NetServices]
MS_Server=params.MS_PSched

[Identification]
JoinDomain = OURDOMAIN
DoOldStyleDomainJoin = Yes

[RemoteInstall]
Repartition = Yes
UseWholeDisk = Yes

[OSChooser]
Description="Win XP Pro SP1"
Help="Win XP Pro SP1 CD image"
LaunchFile=%INSTALLPATH%\%MACHINETYPE%
\templates\startrom.com
ImageType=Flat
Version="5.1"


-----Original Message-----
Hi again.
I did not work :(
nothing special happened when i installed WinXP, I had to
enter the productID. I also noticed that the FullName
= "xxx" didn't work either. I didn't change the xxx value
yesterday...
/Martin
-----Original Message-----
Your welcome.
-----Original Message-----
Hi.
Oh I see, the ristnrd.sif should be in the 2plain" windows
image. Then I have the file. I will try if its work later
today! Thanks again!
/Martin
-----Original Message-----
Hi Martin!

Please repost complete path to your "plain" windows image
that do not include ristnrd.sif file if it is different
from what I erlier posted as an example. I can't
understand how it possible that the file is missing....

From the ref.chm file under unattend.txt (winnt.sif) you
find all the sections and options you can use in your sif
file. ie you can under [Components] exclude games, MSN
Explorer etc and remove visible points to Outlook if it's
not your companys primary email reader.
I think it's worth reading those help files :)

Cheers
Aatu


-----Original Message-----
Hi Aatu.
Thanks for fast and good answer!
It is just one problem, I don't have the RISTNDRD.SIF in
my templates catalogue.
BUT, I have it in other image catalogue, but not the
ones
with plain windows.
Any ide?
What about the deploy.chm and ref.chm????

-----Original Message-----
Hi!


Add to the file RISTNDRD.SIF
(..\RemoteInstall\Setup\..\Images\..\i386\templates) to
section
[UserData]
ProductID = "XXXXX-XXXXX-XXXXX-XXXXX-XXXXX"



Deploy.chm and ref.chm from deploy.cab on your XP CD
will
make you day ;)

Cheers
Aatu


-----Original Message-----
Hi, When I install a new client with RIS- installation
I
need to enter the ProductID at the first start up, is
it
away to do this automatic? ripep.sif?
It is a WinXP install.

/Martin

.

.

.

.

.
Click to expand...
.
Click to expand...
.
Click to expand...
 
Back
Top