enter bios

  • Thread starter Thread starter adrian
  • Start date Start date
A

adrian

can anyone tell me the key combination to enter the bios
on a compaq pc running Win XP.Device manager shows that
there is no network card installed (there is!) and i want
to check if it is enabled in the bios
 
reboot your computer. During this process you should see a message telling
you what key to press. For example on my computer there is a message which
says 'Press F1 to enter setup'. Your computer will have something similar.
 
adrian said:
can anyone tell me the key combination to enter the bios
on a compaq pc running Win XP.Device manager shows that
there is no network card installed (there is!) and i want
to check if it is enabled in the bios
Click to expand...


The fact you're running XP is immaterial. The BIOS has no knowledge of
Windows. If you need BIOS access then may I suggest you read the
documentation that would have been supplied with your system?
--
Cassandra
Card carrying member of the Fresh Start Club 'The Undead Are People
Too!'

Reply address is fake. Please send all praise, abuse, insults, bequests
of £1million to cassandra (at) craigy34 (dot) freeserve (dot) co (dot)
uk. Change the obvious to the obvious.
Private requests for assistance will not be acknowledged. Please post
all correspondence to the group so that all may benefit. Thank you.
 
Reboot the machine. When the company name, Compaq, displays in big red
letters on the Presario's screen, a cursor should appear in the upper right
hand corner of the screen. Press F10, and instead of booting normally, you
should see the setup screen for the Compaq's BIOS.

Someone, in response to seeing this page, told me that some Compaq machines
have F12 as a BIOS setup key. If F10 brings you no joy, it's worth a try
 
In
sqr said:
Reboot the machine. When the company name, Compaq, displays in big red
letters on the Presario's screen, a cursor should appear in the upper
right hand corner of the screen. Press F10, and instead of booting
normally, you should see the setup screen for the Compaq's BIOS.

Someone, in response to seeing this page, told me that some Compaq
machines have F12 as a BIOS setup key. If F10 brings you no joy, it's
worth a try
Click to expand...

it's your sig causing the problems. It's got LOTS of blank lines in it.
 
Greetings --

The operating system is immaterial. Only you know what
motherboard and BIOS you have, so only you know the answer to your
question. ;-}

In the extremely unlikely event that your PC's manual doesn't
contain the needed information, try one or both of the following:

How do I access my computer's setup (BIOS)
http://www.iomega.com/support/documents/2157.html

Wim's BIOS Page
http://www.wimsbios.com/

Accessing Motherboard BIOS
http://www.michaelstevenstech.com/bios_manufacturer.htm

Hint: Compaq uses <F10>


Bruce Chambers

Help us help you:
 
Back
Top