Enermax Case

  • Thread starter Thread starter Mirko
  • Start date Start date
M

Mirko

Look at this Enermax case:
http://tinyurl.com/2qj7y
On the bottom side you'll find a variable resistance with H/L markers to
control the fan.
WHICH FAN?? :-)
My intention is to install a 12x12 fan on the bottom on the case to put
fresh air inside, but this fan @ 12V is very loud (is a 4000rpm Delta, I
have already it and I won't to get a new silent fan).
Do you think that Variable resistance fits it? Do you think that variable
resistance has a 3pin connector inside or what else?!?

Thanks a lot again...
 
Look at this Enermax case:
http://tinyurl.com/2qj7y
Click to expand...

It's a flimsy case... don't be fooled by the pics, it's shiney/pretty but
disappointing in person.

On the bottom side you'll find a variable resistance with H/L markers to
control the fan.
WHICH FAN?? :-)
Click to expand...

The one you plug into it... just that simple.

My intention is to install a 12x12 fan on the bottom on the case to put
fresh air inside, but this fan @ 12V is very loud (is a 4000rpm Delta, I
have already it and I won't to get a new silent fan).
Do you think that Variable resistance fits it? Do you think that variable
resistance has a 3pin connector inside or what else?!?
Click to expand...

It's really not worth the time to worry about, just buy the case if you
really want it, then if the fan plug isn't the same or too short, or you
need an RPM signal tap that isn't provided, then buy an adapter. Cheapest
place to buy fan adapters with cheap USPS shipping for tiny packages is
http://www.svc.com
 
Back
Top