enabling a SCSI device

  • Thread starter Thread starter David Andrews
  • Start date Start date
D

David Andrews

I have a portable laptop with W2KPro installed. I added a
PNP SCSI device to the docking station, connected the
portable and boot W2K. It fails to detect the SCSI device.
I started the Hardware wizard, but when it finished it
didn't detected the device. I want to enable W2K to detect
the device. What should I do to enable this device?

Please help !!!!
 
David Andrews said:
I have a portable laptop with W2KPro installed. I added a
PNP SCSI device to the docking station, connected the
portable and boot W2K. It fails to detect the SCSI device.
I started the Hardware wizard, but when it finished it
didn't detected the device. I want to enable W2K to detect
the device. What should I do to enable this device?

Please help !!!!
Click to expand...

We need specifics here. What device is this? Is the device
turned on and initialized before the laptop is booted? Does
the SCSI controller appear properly in Device Manager?
Is the device terminated properly?

Rick
 
David:

You will have to contact the manufacturer of Notebook and Docking station to see if there
docking station drivers, etc, for Win2K.
You also stated PNP SCSI card. Am I to assume that this is a ISA 16bit card not PCI ?
What the brand make and model of the SCSI interface ?

Dave L.

| I have a portable laptop with W2KPro installed. I added a
| PNP SCSI device to the docking station, connected the
| portable and boot W2K. It fails to detect the SCSI device.
| I started the Hardware wizard, but when it finished it
| didn't detected the device. I want to enable W2K to detect
| the device. What should I do to enable this device?
|
| Please help !!!!
|
 
Back
Top