Emulex Netjet

  • Thread starter Thread starter Harani
  • Start date Start date
H

Harani

I have aquired a few of these cards and am trying to get one working in
my HP laserjet 4.

I've done a test print that shows me the current IP. I set my PC in the
same range and was able to telnet to the netjet card

i found some stuf on the web that said i had to use

define server IP xxx.xxx.xxx.xxx
define server SUBNET xxx.xxx.xxx.xxx

to set a new IP address but when is do so it says i do not have the
required privilige

listig the commands i note there is SU which i presume is superurser.
when i type this i'm prompted for a password.
Anyone know what the default password is for these cards ? I've have
tried stuff like admin admin1 password 1234 etc.
if the password has been changed from it's default is there anyway i
can reset the card back to it's default settings ?

i've read you can also hook a terminal to these cards. anyone know what
the pinout of the serial port is so i can make a suitable cable ?

In short any software, manuals, drivers firmare or otrher info anyone
could point me to for this card i'd be grateful.

cheers

Glen
 
Harani said:
I have aquired a few of these cards and am trying to get one working in
my HP laserjet 4.

I've done a test print that shows me the current IP. I set my PC in the
same range and was able to telnet to the netjet card

i found some stuf on the web that said i had to use

define server IP xxx.xxx.xxx.xxx
define server SUBNET xxx.xxx.xxx.xxx

to set a new IP address but when is do so it says i do not have the
required privilige

listig the commands i note there is SU which i presume is superurser.
when i type this i'm prompted for a password.
Anyone know what the default password is for these cards ? I've have
tried stuff like admin admin1 password 1234 etc.
if the password has been changed from it's default is there anyway i
can reset the card back to it's default settings ?
Click to expand...

This might help:

http://oak.emulex.com/fcsskb/findsol2.asp?solution=2257

Scan down...
i've read you can also hook a terminal to these cards. anyone know what
the pinout of the serial port is so i can make a suitable cable ?

In short any software, manuals, drivers firmare or otrher info anyone
could point me to for this card i'd be grateful.
Click to expand...

Contact Emulex and suggest they post the information on their web site,
or at least provide it directly.
 
Warren said:
This might help:

http://oak.emulex.com/fcsskb/findsol2.asp?solution=2257

Scan down...


Contact Emulex and suggest they post the information on their web site,
or at least provide it directly.
Click to expand...


brilliant that worked thanks

the card was still at it's default password. I've got one of the cards
changed the other one i made a dumb mistake and set the subnet wrong.
now i can't get back into it to change it (invalid subnet
255.255.255.255) anyone got any thoughs about how to get aorund that ?
how do i contact the card by IP if the subnet is wrong ?

I might have to ty to get it the serial port hooked up :-/
 
Back
Top