DVD Writer won't read DVD's

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I recently upgraded my motherboard to an Intel D925XBC. Hard drives and DVD
writer are on IDE channel, HD as master and DVD as slave. Running XP Pro SP2
with all updates and patches installed from windows update. 512M DDR2 533MHZ,
3.06 P4 socket 775 processor, ATI X300 Video, sound and LAN onboard.
Now the problem. Upgraded motherboard, preformed repair on XP. LG DVD
writer would not read DVD's. Reads and burns CD's perfectly. Explorer showed
drive as DVD-Ram correctly, but would not read DVD's. Purchased Movies or
durned disks. Preformed Clean install of XP Pro, no help problem persisted.
Oh @#$@ I thought, the drive went bad. Replaced LG drive with Samsung DVD
writer. Same symptoms. Uninstalled drive and rebooted, no help. Tried
registry fix suggested in some of the posts here, no help. Was this drive bad
too? RMA'd it and got a replacement, same symptoms. Took LG drive and
installed in son's Dell Optiplex desktop, works perfectly. Put Samsung drive
in dell machine, works perfectly. Tried both drives back in Intel machine and
problem is still there. Intel says it's a software problem. Oh yea, also
upgraded firmware on both LG and Samsung drives.
By looking around the forums here I see I am not the only one having
this kind of problem. Has anyone actually found a fix for this?
Can anyone offer anymore suggestions?
Thanks
 
Uhh...
What DVD burning software are you running on the Intel system?
Did you remove it properly, then reinstall after a subsequent reboot?
 
Running Nero 6.6 on both machines. Nero was also uninstallrd using the
control panel, and then reinstalled after rebooting . When I Removed the
drivers for the DVD drive I shut the machine off, disconnected the drive,
rebooted making sure the drive was no longer showing up in th eBios or XP.
Then turned off, reconnected drive, booted up. Xp saw new hardware and
installed driver.
 
Nero does a lousy uninstall. I would recommend using their cleaner (you can
download it from their site). Otherwise, numerous files and registry
entries stay in place after you "un-install" it and can cause problems on
reinstallation.

--

ykw ~
"There are two means of refuge from the miseries of life:
music and cats." -- Albert Schweitzer
`````````````````````````````````````````````
 
Went to Aheads website ang got the cleaner. Used it. Turned machine off
totally. even without Nero install still won't read a DVD. Even without Nero
installed. Put any DVD in and windows explorer changes from DVD-Ram drive to
CD drive. Reinstalled Nero. Stills sees any DVD as Blank Media.
 
My new $2000 Dell 420 see's DVD-RAM as a drive...won't read the recorded media on the disk.

My $250 POS Compaq laptop reads the DVD-RAM disk fine!!! What gives??

EggHeadCafe.com - .NET Developer Portal of Choice
http://www.eggheadcafe.com
 
running XP. drive used to work - now can only write DVD's, but can't read anything. Drive shows up on system, but can't see file content in explore.
Will keep working it, let you know if I stumble on anything

EggHeadCafe.com - .NET Developer Portal of Choice
http://www.eggheadcafe.com
 
-- I too have a lite-on dvd writer reader player that doesn't recognize media
when the disc is inserted. the os xpsp2 states that all is well and it use
to work but I needed space and added an 80 g harddrive. That's when
everything changed. I will keep at it myself and hopefully work it out and
let u guys know what it is. I hope u will do the same. Thx
Thanks / Mikerrr
 
When you added the 80gb harddrive, did you check that the jumpers on the
back of both the new hard drive AND the optical drive were set correctly?
You cannot have two masters or two slaves on the same IDE cable. One of
each (doesn't matter which is which)
 
yes, Cari. I did. Both master/slave setups . That is the harddrives 40 master
& 80g slave. Along with the cd master/dvd slave. I tried them in various
configurations. I got a suggestion that the dvd might be defective. I tend
to think it is. Ill know soon enogh and get back to u. Thx for your time and
help.
 
Also, I recently received a diagnostic message that there is no parameter for
the F:/ dvd drive. Does that mean that there is no path ?? Thx again. Let
me know what u think.
 
Thx for your response zax. I've been away form the computer for several days
now so please excuse the delay. I'm still in the same situation and will be
plugging away at it. It's become more of a question of longevity now. I
could waste less $ and energy by going out to buy another and installing it,
but I'd rather fix the one I got if I can. If I run into anything I'll get
back to u. thx again.
 
I tried the firmware route from the manufactrurer and it had no effect that I
can see. The company was Lite-On Coorperation. Thx for the post though. I
think mine is the registry.
 
Back
Top