DVD problem

  • Thread starter Thread starter Ian Thompson
  • Start date Start date
I

Ian Thompson

Win XP Home
Duron 1100
Kudoz 7A mainboard
BTC DVD Rom - Secondary Master
Traxdata CD-RW - Secondary Slave

I can't open the drive door tray. XP lists the device
working ok. Software eject or pressing the button does
work.
Changed drive cables, no change.
Same happens with an Aopen DVD 1648.
Have disconnected CD-RW, no change.
I tried booting from a floppy with CDRom support but still
couldn't open the drive door tray. Assumed hardware
problem was reproduced on another QDI mainboard!

Has anyone had a similar problem?
 
----- Ian Thompson wrote: ----

Win XP Hom
Duron 110
Kudoz 7A mainboar
BTC DVD Rom - Secondary Maste
Traxdata CD-RW - Secondary Slav

I can't open the drive door tray. XP lists the device
working ok. Software eject or pressing the button does
work
Changed drive cables, no change
Same happens with an Aopen DVD 1648
Have disconnected CD-RW, no change
I tried booting from a floppy with CDRom support but still
couldn't open the drive door tray. Assumed hardware
problem was reproduced on another QDI mainboard

Has anyone had a similar problem

Try sticking a paper clip or similar object in the small hole in front,It should release the tray.
 
Do you definately have power going to the drive. If the dvd is the only
drive with this problem and it behaves like this on a different computer or
when you use different power cables you might have a duff dvd drive and
probably need a new one.

Enigma
 
-----Original Message-----


----- Ian Thompson wrote: -----

Win XP Home
Duron 1100
Kudoz 7A mainboard
BTC DVD Rom - Secondary Master
Traxdata CD-RW - Secondary Slave

I can't open the drive door tray. XP lists the device
working ok. Software eject or pressing the button NOT does
work.
Changed drive cables, no change.
Same happens with an Aopen DVD 1648.
Have disconnected CD-RW, no change.
I tried booting from a floppy with CDRom support but still
couldn't open the drive door tray. Assumed hardware
BUT problem was reproduced on another QDI mainboard!

Has anyone had a similar problem?

Try sticking a paper clip or similar object in the small
Click to expand...
hole in front,It should release the tray.
 
Back
Top