Dvd/Cd Rom/Burner

  • Thread starter Thread starter Dreadlord_20
  • Start date Start date
D

Dreadlord_20

Not sure what it is, but i have recently come into a problem with my drives.
I have a normal dvd-rom and a dvd/cd burner, and its odd, i have changed out
my ide cable. It seems my drives will read nothing but dvds, my games and
cd-roms all come up as blank cds. I have cleaned the lenses as well, anyone
with an idea as to what the problem is would be greatly appreciated.
 
Dreadlord_20 said:
Not sure what it is, but i have recently come into a problem with my
drives.
I have a normal dvd-rom and a dvd/cd burner, and its odd, i have changed
out
my ide cable. It seems my drives will read nothing but dvds, my games and
cd-roms all come up as blank cds. I have cleaned the lenses as well,
anyone
with an idea as to what the problem is would be greatly appreciated.
Click to expand...

If there are 2 devices on one ide cable (sounds like it) you need to get
an 80-conductor ide cable--not the 40-conductor one. Should clear right up.
HTH, s
 
Dreadlord_20 said:
But why would they work normally for so long with the ide cable i'm using
now?
Click to expand...

Dunno the answer to that, but I've had problematic systems brought to me
for repair, and all I found they needed was the 80-cond. cable. Customers
emphatically claimed they had been working error-free for a year+/-. In
these cases(no pun intended), it involved 1 hd on the same cable with a
cd-burner. My hopes, for you, would be such a simple, low-cost solution.
HTH, s
 
sdlomi2 said:
Dunno the answer to that, but I've had problematic systems brought to
me for repair, and all I found they needed was the 80-cond. cable.
Customers emphatically claimed they had been working error-free for a
year+/-. In these cases(no pun intended), it involved 1 hd on the same
cable with a cd-burner. My hopes, for you, would be such a simple,
low-cost solution. HTH, s
Click to expand...

A quickie might be to simply remove present cable from one of the 2
devices--ensuring other is jumpered as master. s
 
Hmmm let me try that, i just have the 1 IDE cable to both drives and then to
the motherboard. I have a seperate one for my Master HD and my Slave HD is
Sata so :)

I'm gonna try that now.
 
Ok i have removed one cd rom drive from my pc, changed the one in my pc to
master and hooked it up by itself. Gives me the same error message when i
try to autoplay any of my games and still runs dvd's just fine.

It says "the cd rom isnt formatted to run in windows or may be corrupted"
Yet some of my games i can manually run and it still reads them from my cd
rom >.<
 
Back
Top