DVD burn trouble

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I used to be able to burn DVD's with no problem. Then I had a door jamming
problem that caused me to replace my DVD drive. Since then, I have been
unable to burn DVD's. The process starts out just fine, as I begin to write
tracks, everything is fine. After about 12-16 minutes, the write rate drops
to zero, and burning stops. I have replaced the drive again, but the problem
persists. I have tried Roxio, Nero, DVD DeCrypter, and IMGburn, and I have
the same trouble with each. Any clues?
 
Me again. Here is the error message that I get from Nero
Thanks pgapete
1C83-730M-18E5-577X-400K-261A-M360

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1014), size=48128 bytes, created
9/23/1998 3:57:14 AM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll':
Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero API version: 7.0.5.4
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 0, 5, 4

Recorder: <HL-DT-ST DVD+-RW GWA4164B>Version: D108 - HA 1 TA 1 -
7.0.5.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
CdRomPeripheral : SONY CD-RW CRX217E atapi Port 0 ID 0
DMA: On
CdRomPeripheral : HL-DT-ST DVD+-RW GWA4164B atapi Port 0 ID 1
DMA: Off
DiskPeripheral : Maxtor 7L250S0 iaStor Port 1 ID 0
DMA: On

=== CDRom-Device-Map ===
SONY CD-RW CRX217E D: CDRom0
HL-DT-ST DVD+-RW GWA4164B E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2046MB (2095196kB)
Free physical memory: 1312MB (1344460kB)
Memory in use : 35 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

9.2.2006
NeroAPI
12:57:58 PM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started

12:57:58 PM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)

12:57:58 PM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted

12:57:58 PM #4 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory

12:57:58 PM #5 Text 0 File Reader.cpp, Line 124
Reader running

12:57:58 PM #6 Text 0 File Writer.cpp, Line 113
Writer E: HL-DT-ST DVD+-RW GWA4164B running

12:57:58 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

12:57:58 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

12:57:58 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

12:57:58 PM #10 Text 0 File Burncd.cpp, Line 3341
Turn on Disc-At-Once, using DVD media

12:57:58 PM #11 Text 0 File DlgWaitCD.cpp, Line 288
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2281247 (506:56.47, 4455MB)

12:57:58 PM #12 Text 0 File DlgWaitCD.cpp, Line 300
Write in overburning mode: NO

12:57:58 PM #13 Text 0 File DlgWaitCD.cpp, Line 2699
Recorder: HL-DT-ST DVD+-RW GWA4164B, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision
number: 4
Disc Application Code: 0, Extended Information Indicators: 7

12:57:58 PM #14 Text 0 File DlgWaitCD.cpp, Line 472=========================================

12:57:58 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2281248 (2281248) = #2281248/506:56.48
relocatable, disc pos for caching/writing not required/ required, no
patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
2281248 blocks [E: HL-DT-ST DVD+-RW GWA4164B]
--------------------------------------------------------------

12:57:58 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: HL-DT-ST DVD+-RW GWA4164B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0
4671995904, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2281248 | lead-out | 1 | 0x41 | 0x00

12:57:58 PM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

12:57:58 PM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

12:57:58 PM #19 Phase 24 File APIProgress.cpp, Line 278
Caching of files started

12:57:58 PM #20 Text 0 File Burncd.cpp, Line 4175
Cache writing successful.

12:57:58 PM #21 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed

12:57:58 PM #22 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 12x (16,620 KB/s)

12:57:59 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos,
orig at #0): write at #0

12:57:59 PM #24 Text 0 File Cdrdrv.cpp, Line 8663
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer
Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW,
DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h,
4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R03
Product revision number: 4
Number of Physical format information bytes in use in ADIP up to byte 63:
56
Media Specific [16..63]:
00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8
23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

12:57:59 PM #25 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

1:17:43 PM #26 SPTI -600 File SCSIPassThrough.cpp, Line 290
E: CdRom1: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 05 89 40 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x00cc0000: Len x10000
0x00 00 01 BA 44 2B FD 05 B4 8F 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 A8 18 4F C0 03 99 64 E2 39
0xC4 E8 0D B8 54 60 00 C8 78 A7 A7 01 10 F7 B4 28

1:17:43 PM #27 CDR -600 File Writer.cpp, Line 302
Device not available
E: HL-DT-ST DVD+-RW GWA4164B

1:17:43 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

1:17:43 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

1:17:43 PM #30 SPTI -1114 File SCSIPassThrough.cpp, Line 290
E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0E 00 00 00 00 29

1:18:05 PM #31 SPTI -1023 File SCSIPassThrough.cpp, Line 290
E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1023)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 2C

1:18:05 PM #32 Phase 127 File APIProgress.cpp, Line 278
Generating DVD high compatibility borders

1:18:05 PM #33 Phase 129 File APIProgress.cpp, Line 278
Generating DVD borders completed successfully

1:18:05 PM #34 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 12x (16,620 KB/s)

1:18:05 PM #35 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

1:18:05 PM #36 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218),
size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.31a, size=20640 bytes, created
4/5/2005 1:03:00 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs :
0 (Security Option)
 
Alright, I fixed it myself. It turned out to be a problem related to my
transfer rate. My devices were on the Primary IDE Channel, CD ROM designated
as master and DVD drive designated as slave. I tried all of the fixes to
reset from PIO to DMA, but none worked. It seems that my machine will only
allow one drive to transfer via UDMA2, and Device 0 was allowed it. I
switched the IDE cable so that DVD is now master and CD now slave. Worked
pretty well. Am still having trouble burning DL discs, though
 
Back
Top