Duplex Printing

  • Thread starter Thread starter Lori
  • Start date Start date
L

Lori

I would like to print my calender double sided and have a
duplex printer. The problem is when I set it up, the 1st
side comes out correct but the flip side is printed upside
down.

Has anyone encoutered this and if so what do I need to
change?
 
Have you checked with the printer manufacturer to see if this is the
expected behavior?

--
Milly Staples [MVP - Outlook]

Post all replies to the group to keep the discussion intact.


After searching google.groups.com and finding no answer
Lori <[email protected]> asked:

| I would like to print my calender double sided and have a
| duplex printer. The problem is when I set it up, the 1st
| side comes out correct but the flip side is printed upside
| down.
|
| Has anyone encoutered this and if so what do I need to
| change?
 
Go into your printer's advanced/properties immediately
prior to printing and switch which edge the flip is made
over. You are probably having it flip over the short edge
instead of the long edge, (or vice versa).
 
Back
Top