Dual Core Compatibility

  • Thread starter Thread starter Harkhof
  • Start date Start date
H

Harkhof

I'm looking at the 4400+ X2 and need to know if this cpu is compatible with
my
MSI MS-7025 (NEO2 Platinum). MSI's site shows that, as of BIOS version 1.9
(the 2nd latest), support was added for the AMD E6 cpu. Is the dual core in
the E6 family? Has anyone installed the 4400x2 in this board?



Thanks,

Hark
 
If you go to www.amd.com, you'll find only two 4400+ models listed, both
with the E6 stepping.

I've not used an nForce3 mainboard, but I ran a 4400+ on a Via K8T800pro
board (Asus A8V) successfully. I've since moved it to an nForce 4 board, to
switch to a PCI-E graphics card.


Address scrambled. Replace nkbob with bobkn.
 
also...sorry to double post but...I use this forum quite regularily too...
www.amdmb.com
there is a lot of stuff in there on our boards...and complaints so you may
be best to check there and see.
 
Thanks, Bob. I'm considering upgrading to PCI-E, as I need to buy a new
video card for a dell widescreen. Once again, I find myself experiencing the
"snowball effect", where one upgrade leads to another, and another, and...


Thanks again,
Hark
 
Back
Top