Dual Boot Win2kServ as C: & Win98 D:

  • Thread starter Thread starter Catherine
  • Start date Start date
C

Catherine

I want to setup computers that have existing 2 hard drives in them
with Windows 2000server on C: drive and windows 98 on D: or below.

this is for a classroom environment so students can boot into a
windows 98 system and connect the machine to a 2000 domain etc etc,
which is why I do not want the windows 98 partition the primary boot
partition.

After reading this newsgroup it appears that windows 98 must be
installed on C: but hoping someone has a workaround.

Thanks in advance
Catherine
 
You should be able to create and format the two fat32 partitions, then
install Win98 to D:\ followed by installing Windows 2000 to the system
partition.

These may also help.

http://support.microsoft.com/default.aspx?scid=kb;en-us;Q151667
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q118579

--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft MVP [Windows NT/2000 Operating Systems]
Microsoft Certified Professional [Windows 2000]
http://www.microsoft.com/protect


:
| I want to setup computers that have existing 2 hard drives in them
| with Windows 2000server on C: drive and windows 98 on D: or below.
|
| this is for a classroom environment so students can boot into a
| windows 98 system and connect the machine to a 2000 domain etc etc,
| which is why I do not want the windows 98 partition the primary boot
| partition.
|
| After reading this newsgroup it appears that windows 98 must be
| installed on C: but hoping someone has a workaround.
|
| Thanks in advance
| Catherine
 
Back
Top