Driver Path

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

What is the Correct method of supplying additional drivers to an image using
WDS and an Unattend.xml file?

Is it:

a. On the WDS Server's Unattend file (the one supplied to all images and
defined in the "Unattend setting") in the WindowsPE pass or the OFFLINE
Servicing pass ?

b. On the Image specific Unattend file WinPE\Offline Pass ?

c. and why does the "WAIK" adds the UNC path to the Driver's folder as
"D:\drivers" for example and not \\192.168.10.10\drivers ?

I'm currently adding them in the WindowsPE pass of the WDS's unattend.xml
but i encounter problems like:
1. CHIPSET driver folder crash the install with error "Cannot add drivers to
image"
2. Some machines install the correct Device but report "Corrupted drivers"
on all the devices which drivers were added through this method

I know it's long but please help me on this
 
hi,All:
I have downloaded LongHorn Server beta2( build 5384 ) x64 and x86 ISO
images.
I have a motherboard with pure EFI bios in its onboard FlashROM.
I want to install Longhorn on this motherboard ,so i could test this EFI
BIOS functions.
But,i have some questions not sure.
(1) These two iso images all support EFI BIOS(I mean pure EFI bios, no
CSM module in EFI bios)?
If not,which iso image support EFI BIOS? x64 version or x86
version.
(2) If i burned legacy bios into this motherboard's FlashROM,then i
installed Longhorn Server on this motherboard.
After finished installing Longhorn,i reburned EFI BIOS into this
motherboard's FlashROM,then i tried to boot Longhorn
which installed on this motherboard before.
It will be boot successfully?
 
Back
Top