Drive letter missing

  • Thread starter Thread starter Don Pyeatt
  • Start date Start date
D

Don Pyeatt

Hopefully someone here can help this nearly-geezer.

I'm running an XP SP2 machine that until recently has been well behaved.
Seemingly, after installing software for my wife's new Sony camera, drive
"H" has vanished.

I have a floppy (A&B), two hard drives (C&D), two optical drives (E&F) and
one USB removable drive running on the system. The USB drive occupies drive
"G", the last drive in the sequence. I also have a 4-port USB hub that I
use for thumb drives, scanners and cameras. The thumb drives and my Fuji
camera have always appeared as drive "H" when I plug them in.

Now, I can insert a thumb drive and it will not appear in Windows Explorer
nor in My Computer. It will however, appear in device manager as a USB
device. The weird part is, I can plug in a second USB storage device and it
appears as drive "I". If I just leave a spare thumb drive in the hub, all
additional devices operate normally starting with "I" until the hub is full.

I have deleted drive "H" with DISKPART from the command prompt hoping "H"
would clear and operate normally but changed nothing. Of course, I removed
the Sony drivers beforehand.

All suggestions appreciated.

gdp
 
Hopefully someone here can help this nearly-geezer.

I'm running an XP SP2 machine that until recently has been well
behaved. Seemingly, after installing software for my wife's new
Sony camera, drive "H" has vanished.

I have a floppy (A&B), two hard drives (C&D), two optical drives
(E&F) and one USB removable drive running on the system. The USB
drive occupies drive "G", the last drive in the sequence. I also
have a 4-port USB hub that I use for thumb drives, scanners and
cameras. The thumb drives and my Fuji camera have always appeared
as drive "H" when I plug them in.

Now, I can insert a thumb drive and it will not appear in Windows
Explorer nor in My Computer. It will however, appear in device
manager as a USB device. The weird part is, I can plug in a
second USB storage device and it appears as drive "I". If I just
leave a spare thumb drive in the hub, all additional devices
operate normally starting with "I" until the hub is full.

I have deleted drive "H" with DISKPART from the command prompt
hoping "H" would clear and operate normally but changed nothing.
Of course, I removed the Sony drivers beforehand.

All suggestions appreciated.

gdp
Click to expand...

Connect the problem drives and have look in the Disk Management
console:

Control Panel > Admin Tools > Computer Management > Disk Management

If your missing drives are listed it may just be a question of
assigning or reassigning drive letters, or some other fiddling in
there.
 
Toast said:
Connect the problem drives and have look in the Disk Management
console:

Control Panel > Admin Tools > Computer Management > Disk Management

If your missing drives are listed it may just be a question of
assigning or reassigning drive letters, or some other fiddling in
there.
Click to expand...

Have done that, the "H" drive is listed as healthy but not active. The Make
Active button is grayed. Drive "H" will not appear in My Computer nor in
Windows Explorer.

Today I discovered the H drive is listed in Control Panel in Portable Media
Devices > Removable Disk (H) with its contents listed. In Computer
Management > Storage > Removable Storage it is listed as a Library with the
two optical drives.
 
Back
Top