Don't see domain in network

  • Thread starter Thread starter Pupo
  • Start date Start date
P

Pupo

Hi
i have a network with two domain A with IP 10.12.x.x subnet 254.0.0.0 and B
with IP 10.10.x.x subnet 255.0.0.0
If i go in Microsoft Windows Network on domain A i see domain B but can't
browse it, from B domain i can't see A domain, if use ping or \\servername i
was able to ping and reach server.
Can help me to make visible bith domain? There is same configuration that i
forgot?
Tia Pupo
 
Since they are in the different subnets, I would check the WINS settings first. Or you may create WINS server.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
Hi
i have a network with two domain A with IP 10.12.x.x subnet 254.0.0.0 and B
with IP 10.10.x.x subnet 255.0.0.0
If i go in Microsoft Windows Network on domain A i see domain B but can't
browse it, from B domain i can't see A domain, if use ping or \\servername i
was able to ping and reach server.
Can help me to make visible bith domain? There is same configuration that i
forgot?
Tia Pupo
 
For the WINS setting you say to type the Ip of each server in wins tab?
Since they are in the different subnets, I would check the WINS settings first. Or you may create WINS server.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
Hi
i have a network with two domain A with IP 10.12.x.x subnet 254.0.0.0 and B
with IP 10.10.x.x subnet 255.0.0.0
If i go in Microsoft Windows Network on domain A i see domain B but can't
browse it, from B domain i can't see A domain, if use ping or \\servername i
was able to ping and reach server.
Can help me to make visible bith domain? There is same configuration that i
forgot?
Tia Pupo
 
Assuming you have WINS server, I would check the WINS records first.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
For the WINS setting you say to type the Ip of each server in wins tab?
Since they are in the different subnets, I would check the WINS settings first. Or you may create WINS server.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
Hi
i have a network with two domain A with IP 10.12.x.x subnet 254.0.0.0 and B
with IP 10.10.x.x subnet 255.0.0.0
If i go in Microsoft Windows Network on domain A i see domain B but can't
browse it, from B domain i can't see A domain, if use ping or \\servername i
was able to ping and reach server.
Can help me to make visible bith domain? There is same configuration that i
forgot?
Tia Pupo
 
Yes or add two options to your DHCP scope to hand out
to your clients assuming, of course, you have a DHCP server.

For the WINS setting you say to type the Ip of each server in wins tab?
 
Back
Top