Domain is not available and inaccessible boot device

  • Thread starter Thread starter Stefan
  • Start date Start date
S

Stefan

Dear all,
My Notebook Sharp PC UM 10 is not working anymore.
After running the W2k Repair disk the computer ask me now
for a passwort to logon and eveytime I enter any passwort
it says, cannot log on now, because Domain STEFAN is not
available. I never had any network or domain on this
Computer and as there is nothing else on this log on
screen to logon or to change I see no possibility than
repairing it.
Does anybody know how I can get through log on?

If I run the W2K -disk again, it started fine, recognized
my external CD-RW drive (Liteon) but after a while the
blue screen "inaccessible boot devise" STOP 0x0000007b
appears.

What can I do to solve the problem?
I cannot logon to any other screen, tried every command in
F2 F6 and F8, used different external CD-Drives and floppy
disk

Thank you very much for your answer,

Stefan
 
Well, as you suspect it is probably a hardware problem, and as you
changed CDROM drive and floppy disk, that leaves the hard drive as the
most likely problem. Find out who the manufacture is, go to their web
site, download and run their diagnostics on the drive.

Peter Kaufman MCP
 
Back
Top