Does anyone from Microsoft read this group?

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I see a lot of questions that should be very basic, but have no answers, or
if they do have answers they are from other users.
No authoritative answers.
I am having the same problem that many others are. To put it very simply,
My network worked just fine with XP. I have multiple computers on the same
network. Vista RC1 does not connect outside my local network. The only help
from Vista suggests that the problem is with the router, which obviously is
wrong because I am sitting at my other computer right next to vista computer
typing this message.
Obviously there is something about Vista that does not like my connection
and is unable to clearly relate this information.
My internet connection is via Canopy which has a NAT router and firewall
already installed. Disabling the Vista fire wall does not help.
 
I had issue
I resolved it by creating static IP's on the local LAN
then picked the advanced option and manually set the value in "interface
value"
 
That did not solve the problem for me. Did your NAT use a "local" address?
This is the case with my network. I don't think a static IP would have solved
this problem and in either case I am not sure that this is a good solution.
I verified that the DHCP address generated was a "good" address for my
network and I also verified that the settings for "the old" ip address were
exactly the same for Vista and for XP. So it is definitely a problem with
VISTA.
My local network is using 169.254.1.x as an address.
 
In your TCP/IP settings, ipv4, try setting your DNS server as your routers
IP address, and add your ISPs DNS server as alternative DNS.
 
169.254.x.x is an APIPA address

http://wiki.ethereal.com/APIPA

It would be unusual to use this range with a NAT router. Most consumer NAT
routers cannot be configured to use this range. An IP address in this range
usually means that your computer could not contact a DHCP server (normally
your router) and automatically generated an APIPA address. Can you ping your
router or other computers on your network?
 
I may be unusual, but Motorola Canopy CPE devices have always used this
address range and in the case of my ISP, there are over 3000 subscribers
using it without any problems.
Here is some additional information:
1. The Vista computer is using the same IP set-up as it did when it was an
XP machine.
2. From the cmd.exe window, I can use NSLOOKUP to find any number of ip
addresses. Once I have an IP address, I can ping it to my hearts content
without a problem.
3. If I have an IP address, like the one for my ISP 64.135.192.25, I can ftp
to it from the command window.
So the problem appears to be with some setup in the internet explorer or
windows itself.
 
See the thread titled "Vista RC2 - Unable to resolve Internet Names in IE
but NSlookup works!!" Someone else is having a very similar problem with RC2
on a network that uses APIPA addresses. It sounds like a bug. You should
report it.
 
Back
Top