docmd.sendobject

  • Thread starter Thread starter Bill H.
  • Start date Start date
B

Bill H.

How can I use this command (or perhaps a different command) to send an email
with an attachment?

Thx.
 
SendObject can only be used to send plain e-mails or e-mail with access
objects, but not general attachements (as commonly required).

For your needs, you will need to look into some form of automation. There
are numerous possible solution such as: Outlook automation and CDO.
Depending on your exact needs, I would first take a look at Outlook
automation as it is easy to setup and use. For this take a look at

http://www.devhut.net/index.php?lang=en&id=0000000013#AutoOlk

Also, Tony has a good section with various possible solution for e-mailing
from access it might be worth your while to have a quick browse.

http://www.granite.ab.ca/access/email.htm

Post back if you need further help.
--
Hope this helps,

Daniel Pineault
http://www.cardaconsultants.com/
For Access Tips and Examples: http://www.devhut.net
Please rate this post using the vote buttons if it was helpful.
 
Back
Top