I
ITJACKIE
Our W2K DC Server show this erro log in event , this two user computer have
remove from DC network, but why still ask two pc computer in the DNS server,
please davice how can solve out this problems.
Event Type: Error
Event Source: DNS
Event Category: None
Event ID: 4006
Date: 11/29/2004
Time: 9:18:57 AM
User: N/A
Computer: HKMARLOWEX
Description:
The DNS server was unable to create a name in memory for name Paul Law in
zone marlowint.com in the Active Directory. This directory name is ignored.
Use the DNS console to recreate the records associated with this name or
check that the Active Directory is functioning properly and reload the zone.
The event data contains the error.
Data:
0000: 7b 00 00 00 {...
Event Type: Error
Event Source: DNS
Event Category: None
Event ID: 6702
Date: 11/28/2004
Time: 12:49:25 AM
User: N/A
Computer: HKMARLOWEX
Description:
DNS Server has updated its own host (A) records. In order to insure that
its DS-integrated peer DNS servers are able to replicate with this server,
an attempt was made to update them with the new records through dynamic
update. An error was encountered during this update, the record data is the
error code.
If this DNS server does not have any DS-integrated peers, then this error
should be ignored.
If this DNS server's ActiveDirectory replication partners do not have the
correct IP address(es) for this server, they will be unable to replicate
with it.
To insure proper replication:
1) Find this server's ActiveDirectory replication partners that run the DNS
server.
2) Open DnsManager and connect in turn to each of the replication partners.
3) On each server, check the host (A record) registration for THIS server.
4) Delete any A records that do NOT correspond to IP addresses of this
server.
5) If there are no A records for this server, add at least one A record
corresponding to an address on this server, that the replication partner can
contact. (In other words, if there multiple IP addresses for this DNS
server, add at least one that is on the same network as the ActiveDirectory
DNS server you are updating.)
6) Note, that is not necessary to update EVERY replication partner. It is
only necessary that the records are fixed up on enough replication partners
so that every server that replicates with this server will receive (through
replication) the new data.
Data:
remove from DC network, but why still ask two pc computer in the DNS server,
please davice how can solve out this problems.
Event Type: Error
Event Source: DNS
Event Category: None
Event ID: 4006
Date: 11/29/2004
Time: 9:18:57 AM
User: N/A
Computer: HKMARLOWEX
Description:
The DNS server was unable to create a name in memory for name Paul Law in
zone marlowint.com in the Active Directory. This directory name is ignored.
Use the DNS console to recreate the records associated with this name or
check that the Active Directory is functioning properly and reload the zone.
The event data contains the error.
Data:
0000: 7b 00 00 00 {...
Event Type: Error
Event Source: DNS
Event Category: None
Event ID: 6702
Date: 11/28/2004
Time: 12:49:25 AM
User: N/A
Computer: HKMARLOWEX
Description:
DNS Server has updated its own host (A) records. In order to insure that
its DS-integrated peer DNS servers are able to replicate with this server,
an attempt was made to update them with the new records through dynamic
update. An error was encountered during this update, the record data is the
error code.
If this DNS server does not have any DS-integrated peers, then this error
should be ignored.
If this DNS server's ActiveDirectory replication partners do not have the
correct IP address(es) for this server, they will be unable to replicate
with it.
To insure proper replication:
1) Find this server's ActiveDirectory replication partners that run the DNS
server.
2) Open DnsManager and connect in turn to each of the replication partners.
3) On each server, check the host (A record) registration for THIS server.
4) Delete any A records that do NOT correspond to IP addresses of this
server.
5) If there are no A records for this server, add at least one A record
corresponding to an address on this server, that the replication partner can
contact. (In other words, if there multiple IP addresses for this DNS
server, add at least one that is on the same network as the ActiveDirectory
DNS server you are updating.)
6) Note, that is not necessary to update EVERY replication partner. It is
only necessary that the records are fixed up on enough replication partners
so that every server that replicates with this server will receive (through
replication) the new data.
Data: