DLink Di-624 Wireless router and XP Networking

  • Thread starter Thread starter Courtenay
  • Start date Start date
C

Courtenay

I had my network all set on a Linksys router, then
switched to wireless. Now, I can't access my 2 machines
on my network - can ping both - but can't get them to
show up in my network places. I've rerun the network set
up wizard, been through and deleted the bridge fiasco and
am back to square one. The two machines simply will not
see each other. Any ideas?
 
what do you get if using net view \\remotecomputername?

--
For more and other information, go to http://www.ChicagoTech.net

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, MS-MVP, MCSE & CNE
Windows & Network Support, Tips and FAQs on http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
 
But on the notebook with the wireless card I get System
error 1231, network location cannot be reached.
 
quoted from http://www.ChicagoTech.net

System error 1231 has occurred. The network location cannot be reached.

Symptom: When using net view \\computername, you may receive System error
1231.

Resolutions: 1) make sure Client for MS Networks is enabled, 2) make sure
you have permission to access it.
--
For more and other information, go to http://www.ChicagoTech.net


Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, MS-MVP, MCSE & CNE
Windows & Network Support, Tips and FAQs on http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
 
quoted from http://www.ChicagoTech.net

System error 53 - The network path was not found.

Symptom: when using net view \\ip or \\computername, you get system error
53.

Resolutions: 1) if it is domain environment, check your WINS; 2) if it is
peer-to-peer workgroup, enable NetBIOS over TCP/IP; 3) make sure the machine
is running; 4) make sure file and Printer Share enabled on remote computer;
5) make sure client for ms networks is enabled on local computer; 6) make
sure you type the correct name.
--
For more and other information, go to http://www.ChicagoTech.net


Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, MS-MVP, MCSE & CNE
Windows & Network Support, Tips and FAQs on http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
 
Back
Top