disk manager problem

  • Thread starter Thread starter wombat
  • Start date Start date
W

wombat

Hi
When trying to put an image on my second harddrive using
Drive Image, I get the following error message:
"Disk Manager has been detected on drive %lu, but Disk
Manager is not running."
This disk had windows xp installed, but I formatted the
disk to give me a clean second drive.
Is this a Drive Image problem or a XP problem and if so
how do I enable the Disk manager?

PS I don't know if this helps, but the second disk is a
Seagate 80g disk with no jumper leads.
Thanks in advance
 
The drive is set to be a slave and the master has jumpers on
the left set #7 & 8 pins?
See
http://www.seagate.com/support/kb/disc/ref/jumper_settings.html
for pin outs.

Sounds like you need to reinstall Drive Image and then
create the image file.


--
The people think the Constitution protects their rights;
But government sees it as an obstacle to be overcome.


message | Hi
| When trying to put an image on my second harddrive using
| Drive Image, I get the following error message:
| "Disk Manager has been detected on drive %lu, but Disk
| Manager is not running."
| This disk had windows xp installed, but I formatted the
| disk to give me a clean second drive.
| Is this a Drive Image problem or a XP problem and if so
| how do I enable the Disk manager?
|
| PS I don't know if this helps, but the second disk is a
| Seagate 80g disk with no jumper leads.
| Thanks in advance
 
Back
Top