Disabling Northbridge

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Long story but here goes,updated from ME to XP pro trying to update bios got
the following comments.
Disable northbridge enhanced page mode to fix samsung DDR problem
Also add LBA 48 bit addressing mode support.
Advice on how to do the above would be much appreciated

Kind Regards
Alex
 
Before upgrading your operating system it's a good idea to update the BIOS.
No worries, however, you can still update the BIOS and that will quite
possible resolve the messages. Get the most recent BIOS update from the
computer manufacturer.
 
Hi thanks for responding but the bios wont update until i fix the problems so
still trying
Kind Regards
Alex
 
as computer is starting lower left says inter setup press delete so press
hold down delete it will say do u want to esc bios use the arrows on key
board to select
no press enter.u should be at main (tabs up above)use arrow to move selecter
to
access mode press enter to get menu use arrows press enter to accept or esc to
put box away.or if u have differt bios use page up down (on key board) to
change settings. if computer dosn't run nice go back try automatic.to disably
northbride
use arrows to move from tab to tab.go to advanced tab.u will see bridge
conf.high
light it by moving arrows.will use arrows and tabs move around u should find
what u whant.when ur finished hit esc to go to main menu use arrows to go to
the right
to exit tab high light exit & save changes.hit enter.if u don't have owners
book
go to web site of who made mother board download to printer owners book.its
BIG
will give some tips on bios set up.
 
Back
Top