N
Nancy
Hi,
I installed some windows updates the other day and now my
directX is no longer working. It was working fine before
the updates so I'm assuming thats what caused the
problem. I've tried unistalling updates, re-installing
video driver, directX, etc.
Your help on this would be appreciated. I've pasted the
DxDiag.txt below.
------------------
System Information
------------------
Time of this report: 5/1/2004, 16:43:59
Machine name: NANCY
Operating System: Windows 2000 Professional (5.0, Build
2195) Service Pack 4
Language: English (Regional Setting: English)
System Manufacturer: n/a
System Model: n/a
BIOS: Award Plug and Play BIOS Extension
v1.0A
Processor: Intel Pentium III, ~730MHz
Memory: 128MB RAM
Page File: 112MB used, 248MB available
Windows Dir: C:\WINNT
DirectX Version: DirectX 9.0b (4.09.0000.0902)
DX Setup Parameters: Not found
DxDiag Version: 5.03.0001.0902 32bit Unicode
------------
DxDiag Notes
------------
DirectX Files Tab: No problems found.
Display Tab 1: No problems found. Direct3D 7 test
results: Failure at step 8 (Creating 3D Device): HRESULT =
0x887602eb (error code) Direct3D 8 test results: Failure
at step 8 (Creating 3D Device): HRESULT = 0x8876086a (3D
not available) Direct3D 9 test results: Failure at step 8
(Creating 3D Device): HRESULT = 0x8876086a (3D not
available)
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.
--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
---------------
Display Devices
---------------
Card name: NVIDIA RIVA TNT2/TNT2 Pro
Manufacturer: NVIDIA
Chip type: RIVA TNT2/TNT2 Pro
DAC type: Integrated RAMDAC
Device Key:
Enum\PCI\VEN_10DE&DEV_0028&SUBSYS_00000000&REV_15
Display Memory: 32.0 MB
Current Mode: 1024 x 768 (16 bit) (75Hz)
Monitor: Samsung SyncMaster 750s(T)
Monitor Max Res: 1280,1024
Driver Name: nv4_disp.dll
Driver Version: 6.14.0010.5672 (English)
DDI Version: 7
Driver Attributes: Final Retail
Driver Date/Size: 3/24/2004 10:04:00, 4274560 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: nv4_mini.sys
Mini VDD Date: 3/24/2004 10:04:00, 1895648 bytes
Device Identifier: {D7B71E3E-4368-11CF-9875-0A20B4C2CB35}
Vendor ID: 0x10DE
Device ID: 0x0028
SubSys ID: 0x00000000
Revision ID: 0x0015
Revision ID: 0x0015
Video Accel:
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Not Available
DDraw Test Result: Not run
D3D7 Test Result: Failure at step 8 (Creating 3D Device):
HRESULT = 0x887602eb (error code)
D3D8 Test Result: Failure at step 8 (Creating 3D Device):
HRESULT = 0x8876086a (3D not available)
D3D9 Test Result: Failure at step 8 (Creating 3D Device):
HRESULT = 0x8876086a (3D not available)
-------------
I installed some windows updates the other day and now my
directX is no longer working. It was working fine before
the updates so I'm assuming thats what caused the
problem. I've tried unistalling updates, re-installing
video driver, directX, etc.
Your help on this would be appreciated. I've pasted the
DxDiag.txt below.
------------------
System Information
------------------
Time of this report: 5/1/2004, 16:43:59
Machine name: NANCY
Operating System: Windows 2000 Professional (5.0, Build
2195) Service Pack 4
Language: English (Regional Setting: English)
System Manufacturer: n/a
System Model: n/a
BIOS: Award Plug and Play BIOS Extension
v1.0A
Processor: Intel Pentium III, ~730MHz
Memory: 128MB RAM
Page File: 112MB used, 248MB available
Windows Dir: C:\WINNT
DirectX Version: DirectX 9.0b (4.09.0000.0902)
DX Setup Parameters: Not found
DxDiag Version: 5.03.0001.0902 32bit Unicode
------------
DxDiag Notes
------------
DirectX Files Tab: No problems found.
Display Tab 1: No problems found. Direct3D 7 test
results: Failure at step 8 (Creating 3D Device): HRESULT =
0x887602eb (error code) Direct3D 8 test results: Failure
at step 8 (Creating 3D Device): HRESULT = 0x8876086a (3D
not available) Direct3D 9 test results: Failure at step 8
(Creating 3D Device): HRESULT = 0x8876086a (3D not
available)
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.
--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
---------------
Display Devices
---------------
Card name: NVIDIA RIVA TNT2/TNT2 Pro
Manufacturer: NVIDIA
Chip type: RIVA TNT2/TNT2 Pro
DAC type: Integrated RAMDAC
Device Key:
Enum\PCI\VEN_10DE&DEV_0028&SUBSYS_00000000&REV_15
Display Memory: 32.0 MB
Current Mode: 1024 x 768 (16 bit) (75Hz)
Monitor: Samsung SyncMaster 750s(T)
Monitor Max Res: 1280,1024
Driver Name: nv4_disp.dll
Driver Version: 6.14.0010.5672 (English)
DDI Version: 7
Driver Attributes: Final Retail
Driver Date/Size: 3/24/2004 10:04:00, 4274560 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: nv4_mini.sys
Mini VDD Date: 3/24/2004 10:04:00, 1895648 bytes
Device Identifier: {D7B71E3E-4368-11CF-9875-0A20B4C2CB35}
Vendor ID: 0x10DE
Device ID: 0x0028
SubSys ID: 0x00000000
Revision ID: 0x0015
Revision ID: 0x0015
Video Accel:
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Not Available
DDraw Test Result: Not run
D3D7 Test Result: Failure at step 8 (Creating 3D Device):
HRESULT = 0x887602eb (error code)
D3D8 Test Result: Failure at step 8 (Creating 3D Device):
HRESULT = 0x8876086a (3D not available)
D3D9 Test Result: Failure at step 8 (Creating 3D Device):
HRESULT = 0x8876086a (3D not available)
-------------