DHCP

  • Thread starter Thread starter Chris A
  • Start date Start date
C

Chris A

Our network contains 2 server 15 computers running everything from 95 to xp.
My win2000pro machine is not receiving a dhcp address anymore..I cannot see
the network or get on the internet.. We have 2 hubs and 1 router and 1 cable
modem.. One of our servers is configured with a static ip.. so i setup my
computer with a static ip and i can see the network and access the servers
but i still cannot get on the internet using internet explorer..The nic is
fine and the cable is fine... When dhcp is enabled i get a windows
autoconfiguration ip and not a dhcp...If anyone can help please email me at
(e-mail address removed) or post...

Thanks,
jca
 
If you boot configured for DHCP and run "IPCONFIG /RENEW" from the CMD
prompt, do you get a address then? If not, what error do you get? You
should also check the scope on the DHCP server and make sure there are
addresses available. You might also try setting up a reservation for your
Win2K pro machine and see if it'll take that address.

J.C. Hornbeck

This posting is provided "AS IS" with no warranties, and confers no rights.
 
I have tried to ipconfig/renew.. I believe what is happening is my computer
quit seeing the dhcp server..
But i can still see the network if i set up a static ip .(same settings as
our server just different ip.. but i cannot access the internet...

Please help
 
I appreciate the help... I just uninstalled tcp/ip and reinstalled and it
worked.. thanks for everyone's help
 
Back
Top