dhcp & IP pool

  • Thread starter Thread starter Buck LeRoy
  • Start date Start date
B

Buck LeRoy

my users have wired & wireless connectivity per each machine and my dhcp
server hands out two IP's per machine to these users. is there a way to
config dhcp to only allow one IP per machine? my pool is getting used up
quickly at this rate.
 
DHCP addresses are leased out based on the MAC address on the network card.
I'd suggest creating seperate IP subnets/schemes for the wirless and wired
clients or asking users to diable one of the network cards.
----
Thanks,
Rakesh Chanana [MSFT]

When replying, please post to GROUP so that everyone can benefit from the
knowledge.

This posting is provided "AS IS" with no warranties, and confers no rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm


--------------------
 
thanks,


-----Original Message-----
DHCP addresses are leased out based on the MAC address on the network card.
I'd suggest creating seperate IP subnets/schemes for the wirless and wired
clients or asking users to diable one of the network cards.
----
Thanks,
Rakesh Chanana [MSFT]

When replying, please post to GROUP so that everyone can benefit from the
knowledge.

This posting is provided "AS IS" with no warranties, and confers no rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm


-------------------- 50.dsl.pltn13.pacbell.net
67.112.120.50
Click to expand...

.
Click to expand...
 
Back
Top