DFRAG PAUSES FOR VOLUME SHADOW COPY

  • Thread starter Thread starter GJB
  • Start date Start date
G

GJB

I cannot defrag my hard drive due to the fact that it pauses for volume
shadow copy. I have not a clue how to fix this, or what a volume shadow copy
is. Can anyone please assist ? I am using XP SP2.

Thanks.
 
Information on Volume Shadow
http://www.theeldergeek.com/volume_shadow_copy.htm

http://en.wikipedia.org/wiki/Shadow_Copy

Note if the Volume Shadow Copy service (VSS) is activated while a defrag
is performed, then the defragger might stop before it is completed. VSS
is activated when a backup operation is being performed, so either wait
for this operation to complete or disable the VSS momentarily while
running defrag.

Source: http://smallvoid.com:80/article/winnt-services-vss.html

--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
 
OK....so hoe can I disable it ?

Thanks.,

Gerry said:
Information on Volume Shadow
http://www.theeldergeek.com/volume_shadow_copy.htm

http://en.wikipedia.org/wiki/Shadow_Copy

Note if the Volume Shadow Copy service (VSS) is activated while a defrag
is performed, then the defragger might stop before it is completed. VSS
is activated when a backup operation is being performed, so either wait
for this operation to complete or disable the VSS momentarily while
running defrag.

Source: http://smallvoid.com:80/article/winnt-services-vss.html

--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
Click to expand...
 
GJB

Start, Control Panel, Administrative Tools, Services, right click on
Volume Shadow Copy and select Properties. In the window is a scroll bar
to the right of Start Up Type. If the current setting is Automatic
change it to Manual. If already set to Manual change it to Disable.
Click on Apply and OK and restart your computer. After the computer has
restarted check to see if the Volume Shadow service is in a stopped
state. It would be better running your computer with Volume Shadow set
to Manual. Now check whether the pauses in the running of your
Defragmenter no longer occur.


--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
 
Thank Gerry,

it was very useful today aftermore than a year of your original reply post to another member.

Regards,

Claudio
WebCasting Support
Rio de Janeiro, Brazil & New York, USA

cmom



Gerry wrote:

Re: DFRAG PAUSES FOR VOLUME SHADOW COPY
01-jun-08

GJB

Start, Control Panel, Administrative Tools, Services, right click on
Volume Shadow Copy and select Properties. In the window is a scroll bar
to the right of Start Up Type. If the current setting is Automatic
change it to Manual. If already set to Manual change it to Disable.
Click on Apply and OK and restart your computer. After the computer has
restarted check to see if the Volume Shadow service is in a stopped
state. It would be better running your computer with Volume Shadow set
to Manual. Now check whether the pauses in the running of your
Defragmenter no longer occur.


--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~


GJB wrote:

EggHeadCafe - Software Developer Portal of Choice
WPF DataGrid Custom Paging and Sorting
http://www.eggheadcafe.com/tutorial...f-32b2d802ae17/wpf-datagrid-custom-pagin.aspx
 
Back
Top