DFI K8M800-MLVF + Athlon64 2800

  • Thread starter Thread starter Sept1967
  • Start date Start date
S

Sept1967

Is there a software program out there like Motherboard Monitor, or even Asus
Probe, that can monitor fan speeds and temps of this North bridge: VIA®
K8M800 ?

Got this combo last month at Fry's because it was a great deal ($169 for the
pair).
 
Is there a software program out there like Motherboard Monitor, or even Asus
Probe, that can monitor fan speeds and temps of this North bridge: VIA®
K8M800 ?
Click to expand...
Why not just use MBM? Yor board doesn't have to be supported to use it.
Just configure it manually.
 
Probably because



1) Motherboard Monitor gives incorrect readings (-45f to 200+f) and the
programmer who made it, gave up the 7 year project in June2004 - NO Updates.

2) There is no, and wasn't any, program provided by DFI to monitor
temps and fans.
 
1) Motherboard Monitor gives incorrect readings (-45f to 200+f) and the
programmer who made it, gave up the 7 year project in June2004 - NO Updates.
Click to expand...
So fix it. If the readings are wrong, select a different sensor until you
find the valid ones. then mate them to the appropriate speed label.

You don't need updates as long as it supports the sensors in your board.
Just select the proper sensor and type for each. I'm not a windows user
but I didn't have any problem configuring MBM for my Jetway S755MAX board,
which isn't supported by MBM. Just select a similar chipset board and then
configure the sensor readings for it. I chose an ECS K7S5A old socket A
board because it was a SIS chipset, then did it manually..
 
Back
Top