Demand Dial

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I have one ras server on my internal network behind a pix 515 firewall. I am
trying to use another ras server for a remote site outside my firewall to
create a vpn connection be able to access network resources. I able to create
a demand dial connection from the remote server. It shows that I am
connected, I can ping the pix and browse the interent. However I am not able
to ping anything beyond the firewall in my internal network. I have tried to
create a static route to the pix, but I still cannot ping the internal
network. An ideas on what I am doing wrong
 
assuming you connect RRAS to PIX, the PIX ip pool may be different from the
internal ip. posting the configuration of pix may help.

--
For more and other information, go to http://www.ChicagoTech.net

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.ChicagoTech.net
Networking Solutions, http://www.chicagotech.net/networksolutions.htm
VPN Solutions, http://www.chicagotech.net/vpnsolutions.htm
VPN Process and Error Analysis, http://www.chicagotech.net/VPN process.htm
VPN Troubleshooting, http://www.chicagotech.net/vpn.htm
This posting is provided "AS IS" with no warranties.
 
Back
Top