Default Printing with Access

  • Thread starter Thread starter Andy K
  • Start date Start date
A

Andy K

An Access application was created and distributed on a CD. Once the CD
with the access is loaded the default printer settings for access only
change to one of laser printers that we have in the office.

Any ideas why the printers setting would? And they only change for
access either 97 or 2000.
Which settings do I have to look at to ensure this doesn't happen again?

its a big problem because we have already distributed the CD and people
are just printing without checking the settings as one always does. All
the print outs are coming to us hence the need to rectify this.

please help

Regards,

Andy
 
You can save the printer settings (page setup, landscape etc) with each
report. In addition, you can also save the actual printer access is supposed
to use. So, often for special printers, or if you don't want the "default"
printer to be used, and save the user having to switch..then this is a good
feature.

You can see/set the page and printer stuff by viewing a report in design
mode.

While in design mode, you then go file->page setup. On the "page" tab, you
can set a specific printer, or the default printer.
 
Back
Top