Folks
i see no reason to replace cartfidges in my HP 2605dn until the cartridges fail. So
any suggestions on reputable toner refill cartridge sources?
Or just buy the cheapest stuff of Ebay? <shudder>
Tony
http://www.tonerrefillkits.com/
Been using them for years. Have different toner for each printer (HP,
Lexmark, Canon) but only one install kit for all three.
What's in the ReChargX Tool Kit? It would appear to be some kind of drill and bit.
Which I've already got.
Also shipping to Canada is more than the toner itself.
Tony
Mostly a cup shaped tip in a cheap soldering iron with stand. It melts
a hole the proper size for the rubber plugs used to reseal the cart.
You can get the same soldering iron at RatShack for about the same
price as the kit, but I haven't seen the cup shaped tip anywhere else.
You don't want to use a drill as plastic chips will get into the cart.
Ahhhh. Ok said:Also, a pair of needle nose pliers for inserting/removing the plug, a
couple of spare plugs, and a cleanup cloth (waxed yellow pseudo paper
- stretch to activate -- really does a good job on toner.) You only
need to buy the kit once as it is the same for all carts. Each refill
kit comes with plugs, cleanup cloth, and instructions.
Tony said:I believe that the cartridge will need a new chip, you may wish to enquire of
the supplier.
Also, the waste compartment is tiny in this cartridge and emptying it needs a
hacksaw and replacement drum gears, I doubt it would handle more than one
refill (the drum certainly won't!).
But with a chip and toner you would hopefully be able to use the cartridge
twice. I just remembered, I think you can bypass the chips from the front panel
menu, that means you won't need chips but you will lose all toner level
indication.
Arthur Entlich said:But here in Canada, duct works is used for everything, not just toner
cartridges.
How many cars here are held together with duct tape?
It's a tool that is a 'must have' in everyone's tool box.