M
Mike
Direct cable connection requires use of serial ports, I think.. the little
nine pin 'D's..
nine pin 'D's..
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
G
Guest
I'm connecting a new laptop running XP with a Desktop
computer running 98. I'm connecting LP1 ports. I've been
looking though the error messages,
A certificate could not be found. Connections that use
the L2TP protocol over IPSec require the installation of
a machine certificate, also known as a computer
certificate. No L2TP calls will be accepted.
Unable to add the interface {46FD3B21-76C2-4955-87E9-
BD2DAC815705} with the Router Manager for the IP
protocol. The following error occurred: Cannot complete
this function.
Unable to contact a DHCP server. The Automatic Private IP
Address 169.254.36.195 will be assigned to dial-in
clients. Clients may be unable to access resources on the
network.
Unable to contact a DHCP server. The Automatic Private IP
Address 169.254.64.188 will be assigned to dial-in
clients. Clients may be unable to access resources on the
network.
Any suggestions?
computer running 98. I'm connecting LP1 ports. I've been
looking though the error messages,
A certificate could not be found. Connections that use
the L2TP protocol over IPSec require the installation of
a machine certificate, also known as a computer
certificate. No L2TP calls will be accepted.
Unable to add the interface {46FD3B21-76C2-4955-87E9-
BD2DAC815705} with the Router Manager for the IP
protocol. The following error occurred: Cannot complete
this function.
Unable to contact a DHCP server. The Automatic Private IP
Address 169.254.36.195 will be assigned to dial-in
clients. Clients may be unable to access resources on the
network.
Unable to contact a DHCP server. The Automatic Private IP
Address 169.254.64.188 will be assigned to dial-in
clients. Clients may be unable to access resources on the
network.
Any suggestions?
G
Guest
-----Original Message-----
I'm connecting a new laptop running XP with a Desktop
computer running 98. I'm connecting LP1 ports. I've been
looking though the error messages,
A certificate could not be found. Connections that use
the L2TP protocol over IPSec require the installation of
a machine certificate, also known as a computer
certificate. No L2TP calls will be accepted.
Unable to add the interface {46FD3B21-76C2-4955-87E9-
BD2DAC815705} with the Router Manager for the IP
protocol. The following error occurred: Cannot complete
this function.
Unable to contact a DHCP server. The Automatic Private IP
Address 169.254.36.195 will be assigned to dial-in
clients. Clients may be unable to access resources on the
network.
Unable to contact a DHCP server. The Automatic Private IP
Address 169.254.64.188 will be assigned to dial-in
clients. Clients may be unable to access resources on the
network.
Any suggestions?
.