CPU previously Shut Down due to Thermal Event ( Overheating)

  • Thread starter Thread starter dsvenkat1819
  • Start date Start date
D

dsvenkat1819

PIV 2.8 GHz H
Intel D 865GBF/512MB DDR 33
230 W ATX

Problem:On Booting following message comes
CPU previously Shut Down due t
Thermal Event ( Overheating)
Press F4 to continue.F2 to enter setup.Bu
neither function is working.Displays
Entering Setup ,but doesn't do so.No error beeps are encountere
durin
POST
All fans are running.Keyboard & Mouse are detected.Also it say

"service the unit to resolve this".

How can i resolve this problem..
Plz.... help me...
 
PIV 2.8 GHz HT
Intel D 865GBF/512MB DDR 333
230 W ATX.

Problem:On Booting following message comes:
CPU previously Shut Down due to
Thermal Event ( Overheating).
Press F4 to continue.F2 to enter setup.But
neither function is working.Displays
Entering Setup ,but doesn't do so.No error beeps are encountered
during
POST.
All fans are running.Keyboard & Mouse are detected.Also it says

"service the unit to resolve this".

How can i resolve this problem...
Plz.... help me....
Click to expand...

My first guess is that you're heatsink is not seated properly and/or
does not have any thermal compound between it and the processor.
 
PIV 2.8 GHz HT
Intel D 865GBF/512MB DDR 333
230 W ATX.

Problem:On Booting following message comes:
CPU previously Shut Down due to
Thermal Event ( Overheating).
Press F4 to continue.F2 to enter setup.But
neither function is working.Displays
Entering Setup ,but doesn't do so.No error beeps are encountered
during
POST.
All fans are running.Keyboard & Mouse are detected.Also it says

"service the unit to resolve this".

How can i resolve this problem...
Plz.... help me....
Click to expand...

Any chance this is a Dell? I've seen this happen when the caps start
leaking on the motherboard (Nichicon parts.)
 
The capacitors next to your CPU probably have a light brown substance
on top of them indicating its time for a new motherboard.
 
Hi Venkat,

I am facing very similar problem in my very similar configuration
system. This is 3GHZ. But in my system after the thermal over
heating message, i got a siron like beep. Now after many attempts,
it is starting with BIOS setup screen and b4 i enter anything, system
goes off.

What solution u got for your problem. This is urgent and pls reply to
my id privately @ (e-mail address removed)

Thanks
 
Hi Venkat,

I am facing very similar problem in my very similar configuration
system. This is 3GHZ. But in my system after the thermal over
heating message, i got a siron like beep. Now after many attempts,
it is starting with BIOS setup screen and b4 i enter anything, system
goes off.

What solution u got for your problem. This is urgent and pls reply to
my id privately @ (e-mail address removed)

Thanks
 
Back
Top