Could a virus do that ?

  • Thread starter Thread starter andy smart
  • Start date Start date
A

andy smart

Marcus said:
Hello,

My IP adress is normally assigned by the DHCP of my router.

It works well on all my Laptops which are linked to the router via a
wireless device (IP address given is 192.168.0.10x). But on my Desktop (it
used to work ok yesterday) which is linked to the router via a network
cable, it gives a complete different IP adress (169.254.226.159), it does
not show any DHCP address or anything else. Of course I cannot connect to
the internet.

By the way, I use win2000 and my ip configuration in the network
configuration on my non-working desktop is the same as the working Laptop
one.

I will really appreciate any help

Marc
Click to expand...
The 169.254\16 address range is an autoconfiguration range for when a
dhcp server cannot be found (see link below) - I'd suggest that your
computer is not actually connecting to the DHCP server, and by extension
perhaps to the network. Check your cable connections or try another
cable perhaps?

http://www.more.net/technical/netserv/tcpip/private.html
 
Hello,

My IP adress is normally assigned by the DHCP of my router.

It works well on all my Laptops which are linked to the router via a
wireless device (IP address given is 192.168.0.10x). But on my Desktop (it
used to work ok yesterday) which is linked to the router via a network
cable, it gives a complete different IP adress (169.254.226.159), it does
not show any DHCP address or anything else. Of course I cannot connect to
the internet.

By the way, I use win2000 and my ip configuration in the network
configuration on my non-working desktop is the same as the working Laptop
one.

I will really appreciate any help

Marc
 
Andy,

Thank you for you answer, I have checked the connection and the cable, they
are both OK, I have also tryed to connect direct to my cable modem not via
the routeur and the same thing happens ...

Any idea,
Marc
 
The problem getting a 192.168 IP address would seem to be a problem
connecting to whichever of the two devices on your network is acting as your
internal DHCP server [your router?]. As you may know, your computer doesn't
immediately re-try to get an IP address until you reboot or you do Start,
Run, CMD, OK and type IPCONFIG /RENEW * You must be connected to the
network when you do either of these for this to work. Even if it doesn't
work, you should at least get a more verbose error message that might help.

Since the other computer is working fine, I wonder if maybe your Windows
2000 computer is having a problem with its network card.
 
Back
Top