copy track to the iRC5180

  • Thread starter Thread starter eager
  • Start date Start date
E

eager

I have a customer that wants to connect a copy track to the iRC5180 and on
the copy track side there is a connecter with 4 wires: White and Black - for
the loop, Red for the signal and Blue for the ground. On the machine side
there is only a 5 pin connector which is supposed to be for the card reader,
but as there is no other connector for the copy track, I guess I have to use
this one. the pins on the connector are as follows: 1. - ground; 2. - 5v;
3. - Coin Count; 4. - Coin TXD and 5. - Coin RXD

Any ideas will be appreciated!

Thanks
 
eager <[email protected]> said:
I have a customer that wants to connect a copy track to the iRC5180 and on
the copy track side there is a connecter with 4 wires: White and Black - for
the loop, Red for the signal and Blue for the ground. On the machine side
there is only a 5 pin connector which is supposed to be for the card reader,
but as there is no other connector for the copy track, I guess I have to use
this one. the pins on the connector are as follows: 1. - ground; 2. - 5v;
3. - Coin Count; 4. - Coin TXD and 5. - Coin RXD

Any ideas will be appreciated!
Click to expand...

As in your other thread, you might have more joy on
theprinternetwork.com
 
Back
Top