Copy To PaperPport Printer Driver Has White Lines

  • Thread starter Thread starter Greg Reed
  • Start date Start date
G

Greg Reed

PaperPort 9

New Canon 3200f ScannerUsing Canon's Copy Facility (& Previously HP's Although slightly dif. results) but printing to Paperports Printer Driver instead of hard copy I get poor results.I am trying to get the Canon Buttons to Scan a B/W page Direct into Paperport at its
standard .max file format.

I use the copy button (or from the software) and set the printer up as PaperPort Black & White.
So it scans then sends to printer, in this case the paperport driver instead of a normal printer.
However there are perhaps 15 thin horizontal, evenly spaced white lines
going across the page.

If I use the colour printer driver in the same way it OK, but later
conversions are not great and time consuming.
Tried all resolutuons.

If I use the canon twain and scan direct from paperport its fine.
If I scan the same document normally using the twain then print to Paperport
B/W Printer Driver its OK, which is weird.
Actually printing to the printer seems to be OK.

My old HP5400c use to work'ish but again quality was slighter poorer than
using twin inside an application.

Can link to paperport but saves as jpg so again manually conversion to
native .max format.

Any idea's.
I like paperport and I also like using button from the scanner rather than
going to keyboard each time.

Thanks I/A
Greg Reed.
 
Continuation to my own post above.

Picking up from someone on another thread about his copy facility (on different scanner) only worked if Scaled as it scanned.

I changed mine to scale custom 99% & 101% and I get perfect copy?!? albeit few mm bigger or smaller so not ideal
Unfortunately Custom 100% still gives problems.

Interesting, Any ideas?

Greg Reed
PaperPort 9

New Canon 3200f ScannerUsing Canon's Copy Facility (& Previously HP's Although slightly dif. results) but printing to Paperports Printer Driver instead of hard copy I get poor results.I am trying to get the Canon Buttons to Scan a B/W page Direct into Paperport at its
standard .max file format.

I use the copy button (or from the software) and set the printer up as PaperPort Black & White.
So it scans then sends to printer, in this case the paperport driver instead of a normal printer.
However there are perhaps 15 thin horizontal, evenly spaced white lines
going across the page.

If I use the colour printer driver in the same way it OK, but later
conversions are not great and time consuming.
Tried all resolutuons.

If I use the canon twain and scan direct from paperport its fine.
If I scan the same document normally using the twain then print to Paperport
B/W Printer Driver its OK, which is weird.
Actually printing to the printer seems to be OK.

My old HP5400c use to work'ish but again quality was slighter poorer than
using twin inside an application.

Can link to paperport but saves as jpg so again manually conversion to
native .max format.

Any idea's.
I like paperport and I also like using button from the scanner rather than
going to keyboard each time.

Thanks I/A
Greg Reed.
 
Back
Top