Continuous ink system

  • Thread starter Thread starter Pete S
  • Start date Start date
P

Pete S

Hi all

Just fitted the above to my R300, initial results great but I note that with
some kits there is a bottle at the rear of the printer to collect the waste
ink from cleaning etc. Has anyone got any info on what to get and how to fit
such a bottle, and more importantly how to reste the counter when it says go
away and call the service eng I'm full. :-o

Cheers

Peter
 
Shooter said:
Sorry to the group for multi reply, still not sure what happened.
Hi Shooter

Cheers for that, I've seen the tube in the back but was unsure as to what it
did. Now all I need is the reset software.

Peter.
 
Pete S said:
Hi Shooter

Cheers for that, I've seen the tube in the back but was unsure as to what it
did. Now all I need is the reset software.

Peter.

Peter
http://www.ssclg.com/epsone.shtml. This utility does not reset the counters on
the R300 but the web site indicates that it can freeze them, I guess that will
work for you. Worth a try.
Tony
 
Pete S said:
Hi Tony

I've tried that utillity but could not get it to work for me, perhaps I
didn't run it properly.

Peter.

Peter
I have used the utility literally hundreds of times but I have never done so on
this model or to freeze ink counters so I can't be certain that it works in
that regard. The other possibility is to use resettable chips and/or a chip
resetter.
I also found this information -
Press and hold 'stop' 'maintenance' and 'power' buttons for about 10 seconds, a
message will come on the screen saying counter is reset and to turn off. Don't
know if it works, no harm in trying.
Tony
 
Yes indeed pleased to help, I would recommend you use the Epson AP, if you
go to www.inkjetprinterhelp.us Wes has the manual and AP for $10 or in UK
money £5.76 or there about, with the AP program it will check you reset
figure which on the R300 is around 32000 points but it does a lot more than
other programs out there.
 
Shooter said:
Yes indeed pleased to help, I would recommend you use the Epson AP, if you
go to www.inkjetprinterhelp.us Wes has the manual and AP for $10 or in UK
money £5.76 or there about, with the AP program it will check you reset
figure which on the R300 is around 32000 points but it does a lot more
than
other programs out there.
Hi again Shooter

Just retried the SSC util and it does in deed rest the protection counter,
so I'm in business now, just need to get some bits from the lab at work to
fit a waste ink tank.

Cheers

Peter.
 
Back
Top