consistency of Harddisk !?

  • Thread starter Thread starter majki majk
  • Start date Start date
M

majki majk

Hi! I'm getting "One of your disks need to be checked for consistency"
message everytime i load my notebook, this jumps out when loading windows
XP.
Then goes "Checking file system on D:....." ....NTFS...

0KB in bed sectors, i really don't know what other information is relevant,
i always thought bad sectors are the most important for recognizing the
problem.

Harddisk is Samsung HM080JI (80GB) and divided into three partitions.

I noticed the problem when my notebook turned off several times in a row due
to a problem with an electrical contact which i have on this laptop.

Would really be appreciated for your help!
 
Majki

Try HD Tune(freeware) as you can see the SMART
information relating to the drive etc.

Download and run it and see what it turns up.
http://www.hdtune.com/

Select the Info tabs and place the cursor on the drive under Drive
letter and then double click the two page icon ( copy to Clipboard )
and copy into a further message.

Select the Health tab and then double click the two page icon ( copy to
Clipboard ) and copy into a further message. Make sure you do a full
surface scan with HD Tune.


--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
 
From: "majki majk" <[email protected]>

| Hi! I'm getting "One of your disks need to be checked for consistency"
| message everytime i load my notebook, this jumps out when loading windows
| XP.
| Then goes "Checking file system on D:....." ....NTFS...
|
| 0KB in bed sectors, i really don't know what other information is relevant,
| i always thought bad sectors are the most important for recognizing the
| problem.
|
| Harddisk is Samsung HM080JI (80GB) and divided into three partitions.
|
| I noticed the problem when my notebook turned off several times in a row due
| to a problem with an electrical contact which i have on this laptop.
|
| Would really be appreciated for your help!
|

Obtain Samsung hard disk diagnostics.

The drive may be failing.

Samsung - Disk manager
http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
 
Gerry said:
Majki

Try HD Tune(freeware) as you can see the SMART
information relating to the drive etc.

Download and run it and see what it turns up.
http://www.hdtune.com/

Select the Info tabs and place the cursor on the drive under Drive
letter and then double click the two page icon ( copy to Clipboard )
and copy into a further message.

Select the Health tab and then double click the two page icon ( copy to
Clipboard ) and copy into a further message. Make sure you do a full
surface scan with HD Tune.
Click to expand...
Thanks Gerry!

Although, this just gives me another pack of analyzes.
I hope it'll turn out fine.
 
This is what i copied from tune pro, for now...i started the program but
very soon the blue screen showed up. it'seems something isn't quite
ordinarily.

HD Tune Pro: SAMSUNG HM080JI Information

Firmware version : YC10
Serial number :
Capacity : 74.5 GB (~80.0 GB)
Buffer size : n/a
Standard :
Supported mode :
Current mode :

S.M.A.R.T : no
48-bit Address : no
Read Look-Ahead : no
Write Cache : no
Host Protected Area : no
Device Configuration Overlay : no
Firmware Upgradable : no
Automatic Acoustic Management: no
Power Management : no
Advanced Power Management : no
Interface Power Management : no
Power-up in Standby : no
Security Mode : no
Native Command Queuing (NCQ) : no

Volume : Glavni (C:)
Capacity : 25933 MB
Free : 13009 MB
Usage : 50%
File system : NTFS
Serial : 28D5-BAAC

Volume : Klipovi (K:)
Capacity : 25117 MB
Free : 9296 MB
Usage : 63%
File system : NTFS
Serial : 3CD7-4EB9

Volume : J'ai (D:)
Capacity : 25266 MB
Free : 22320 MB
Usage : 12%
File system : NTFS
Serial : C413-2BC6


HD Tune Pro: SAMSUNG HM080JI Health

ID Current Worst ThresholdData Status

Power On Time : n/a
Health Status : n/a
 
Majki

Is SMART enabled in the BIOS?

--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
 
Hey! I first must make a bekap copy on to the other computer for this
cca35GB disk usage. So i'm working on that. I shall memorize your e-mail and
then contact you tommorow,... i expect, so you could help me with the
diagnostic data.
 
Hi !
I haven't found any option called SMART in bios nor ntohing similar. Don't
know what SMART means in computer language anyhow.
Bios version is 1.07.
 
Majki

What is the computer make and model?

What is the motherboard make and model?

How old is the computer?

--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
 
From: "majki majk" <[email protected]>

| Hey! I first must make a bekap copy on to the other computer for this
| cca35GB disk usage. So i'm working on that. I shall memorize your e-mail and
| then contact you tommorow,... i expect, so you could help me with the
| diagnostic data.
|

I didn't send you email. Replied in a news post.

I'll look for your reply.
 
Thanks. I think i'll give a try at live-human analyzes at service guy :)
All this kind of analyzes don't help me much solving the problem.
 
Back
Top