M
mark luyt
set up is PC with vista, through modem to switch to printer, I have set up
the driver (canon ip4000) but cannot print, any suggestions
the driver (canon ip4000) but cannot print, any suggestions
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
C
Cari \(MS-MVP\)
Through a modem???? Do you mean you remote into it?
M
mark luyt
the modem is acting as my router, the PC goes into the modem, the switch is
wired into the modem and the switch picks up the everthing in the house i.e
the printer
wired into the modem and the switch picks up the everthing in the house i.e
the printer
C
Cari \(MS-MVP\)
Something (usually a router) has to assign a TCP/IP address to the printer.
I have no idea whether your modem can do such a thing. If it can, you
simply install the ip4000 as a network printer.
If it's got no TCP/IP address, then you're very stuck. I cannot magically
make a modem perform DHCP if it's not in its firmware.
I have no idea whether your modem can do such a thing. If it can, you
simply install the ip4000 as a network printer.
If it's got no TCP/IP address, then you're very stuck. I cannot magically
make a modem perform DHCP if it's not in its firmware.
T
Tom Ferguson
Possibly he means a modem/router/switch/WAP similar to the Netgear DG834GV