Connecting Husqvarna Card reader writer problem

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

My mother just purchased a new computer (1st timer), She wants to connect a
Husquvarna Embroidery Card Reader/Writer. It connects with 25 pin serial
cable so we got her a USB to serial adapter cable and loaded the software
that came with it. Now when we try to read from the card reader we get the
following error.

The top of the window reads "Husqvarna Viking Reader Writer PRO NT"
then in the box it reads "Fault by SEMLPT.SYS"

Please help, I'm not able to help her and she is getting discouraged with
her new fangled sewing machine, since it will not do all the thing she bought
it for.
 
Does the manufacturer list an email address in the documentation? Did the
usb to serial adaptor come with the Viking?
 
I had a client who also tried this. You have to get away from the serial
cable. It does not read correctly through the USB thus the errors OR find a
computer prior to 2001 and it will have a serial connection. Good luck.

Colin Barnhorst said:
Does the manufacturer list an email address in the documentation? Did the
usb to serial adaptor come with the Viking?

--
Colin Barnhorst [MVP Windows - Virtual Machine]
(Reply to the group only unless otherwise requested)
Kevin said:
My mother just purchased a new computer (1st timer), She wants to connect
a
Husquvarna Embroidery Card Reader/Writer. It connects with 25 pin serial
cable so we got her a USB to serial adapter cable and loaded the software
that came with it. Now when we try to read from the card reader we get the
following error.

The top of the window reads "Husqvarna Viking Reader Writer PRO NT"
then in the box it reads "Fault by SEMLPT.SYS"

Please help, I'm not able to help her and she is getting discouraged with
her new fangled sewing machine, since it will not do all the thing she
bought
it for.
Click to expand...
Click to expand...
 
Kevinwrote
My mother just purchased a new computer (1st timer), She wants t
connect a
Husquvarna Embroidery Card Reader/Writer. It connects with 25 pi serial
cable so we got her a USB to serial adapter cable and loaded th software
that came with it. Now when we try to read from the card reader w get the
following error

The top of the window reads "Husqvarna Viking Reader Writer PRO NT
then in the box it reads "Fault by SEMLPT.SYS

Please help, I'm not able to help her and she is getting discourage with
her new fangled sewing machine, since it will not do all the thin she bought
it for.Do you already have a solutions ?
Click to expand...
I'm having the same problem recently
The only difference is that I use just a lpt cable with no USB t
serial adaptor

And as a fact it did work !!
 
My reader writer is not the USB and I'm still getting the same error. I
have emailed Husqvarna four days ago, and have not received a response. Can
anyone assist me with steps to correct this problem.
Thanks
 
Jo said:
My reader writer is not the USB and I'm still getting the same error.
I
have emailed Husqvarna four days ago, and have not received a
response. Can anyone assist me with steps to correct this problem.
Thanks
Click to expand...

You didn't tell us what the error is. If your "reader writer" isn't USB,
you didn't tell us what it *is*. Refer to this site for what details
you need to include in your next newsgroup post in order to get focused
help:

http://www.dts-l.org/goodpost.htm

Malke
 
With regard to my previous query which, after following your advise was solved, the next. The old power cable for the reader writer was totally worn out and did not make proper connection. I thought I would bring it with to the UK, but somewhere it went missing with the unpacking. Is there a way that I could purchase another power cable.

Reader writer : Husqvarna Embroidery Card Reader/Writer
Computer : Windows XP
Husqvarna Embroidery Machine : Orchid / 1250
Printer : Canon IP 4200

The reader writer also has two options for the 25 pin connection, either computer or printer. I was also advised to plug it in at the 'printer port' on the R/W. Is there any difference - Computer port or printer port?

My main concern now is to get power to the R/W PLEASE HELP
 
power cable for reader writer

With regard to my previous query which, after following your advise was solved, the next. The old power cable for the reader writer was totally worn out and did not make proper connection. I thought I would bring it with to the UK, but somewhere it went missing with the unpacking. Is there a way that I could purchase another power cable.

Reader writer : Husqvarna Embroidery Card Reader/Writer
Computer : Windows XP
Husqvarna Embroidery Machine : Orchid / 1250
Printer : Canon IP 4200

The reader writer also has two options for the 25 pin connection, either computer or printer. I was also advised to plug it in at the 'printer port' on the R/W. Is there any difference - Computer port or printer port?

My main concern now is to get power to the R/W PLEASE HELP
Elmarie Nel
 
Last edited:
Reader Writer Power Cable

With regard to my previous query which, after following your advise was solved, the next. The old power cable for the reader writer was totally worn out and did not make proper connection. I thought I would bring it with to the UK, but somewhere it went missing with the unpacking. Is there a way that I could purchase another power cable.

Reader writer : Husqvarna Embroidery Card Reader/Writer
Computer : Windows XP
Husqvarna Embroidery Machine : Orchid / 1250
Printer : Canon IP 4200

The reader writer also has two options for the 25 pin connection, either computer or printer. I was also advised to plug it in at the 'printer port' on the R/W. Is there any difference - Computer port or printer port?

My main concern now is to get power to the R/W PLEASE HELP
Elmarie Nel
(e-mail address removed)
3 The Mount
Petworth Road
Witley
GU85PL
 
With regard to my previous query which, after following your advise was solved, the next. The old power cable for the reader writer was totally worn out and did not make proper connection. I thought I would bring it with to the UK, but somewhere it went missing with the unpacking. Is there a way that I could purchase another power cable.

Reader writer : Husqvarna Embroidery Card Reader/Writer
Computer : Windows XP
Husqvarna Embroidery Machine : Orchid / 1250
Printer : Canon IP 4200

The reader writer also has two options for the 25 pin connection, either computer or printer. I was also advised to plug it in at the 'printer port' on the R/W. Is there any difference - Computer port or printer port?

My main concern now is to get power to the R/W PLEASE HELP
 
power cable for reader writer

With regard to my previous query which, after following your advise was solved, the next. The old power cable for the reader writer was totally worn out and did not make proper connection. I thought I would bring it with to the UK, but somewhere it went missing with the unpacking. Is there a way that I could purchase another power cable.

Reader writer : Husqvarna Embroidery Card Reader/Writer
Computer : Windows XP
Husqvarna Embroidery Machine : Orchid / 1250
Printer : Canon IP 4200

The reader writer also has two options for the 25 pin connection, either computer or printer. I was also advised to plug it in at the 'printer port' on the R/W. Is there any difference - Computer port or printer port?

My main concern now is to get power to the R/W PLEASE HELP
 
As a follow-up to the lost power pack question... Does anyone that has one know the output voltage & amperage of the power pack? Then another of same style could be used.
 
Husqvarna embroidery card reader writer power supply

Were you able to locate the specification for the power supply cord because I have also lost mine and would like to know since I have the following machine.

Reader writer : Husqvarna Embroidery Card Reader/Writer
Computer : Windows XP
Husqvarna Embroidery Machine : Rose 600
Printer : HP 2610


 
Back
Top