connect only once to ts

  • Thread starter Thread starter Gary
  • Start date Start date
G

Gary

I have loaded ts application mode onto a hp proliant380
server and no matter how I load it I can login one time.
After that I get this error; "Because of a security
error, the client could not connect to the remote
computer. Verify that you are logged on to the network,
and then try connecting again"
If I set it up in the remote admin mode it works fine.

Thanks for any and all help.
 
Not really, except that the problem in one way or the other has to
do with the transfer of the permanent TS CAL from the TS to the
client (which happens on the second connection).
Is this client located on the same LAN as the TS? If not, could
you check for a black hole router?
After deleting the Certificates from the LS, have you deleted the
temporary license from the client?
Are these clients thin clients? Which OS do they run? And which
version of the rdp client? Have you tried updateing with the
latest firmware and/or the latest 5.2 rdp client?

http://www.microsoft.com/downloads/details.aspx?FamilyID=a8255ffc-
4b4a-40e7-a706-cde7e9b57e79&DisplayLang=en

314825 - How to Troubleshoot Black Hole Router Issues
http://support.microsoft.com/?kbid=314825

187614 - Removing Terminal Server Licenses from an RDP Client
http://support.microsoft.com/?kbid=187614
 
We only have one domain but different subnets. It does
not look like we have a black hole router problem. I have
deleted the certs from the server and from the client.
The server is running win2000 and the clients are XP. I
have not updated the rdp or checked on it yet. One other
thing I found out even if I do a fresh install but I wait
for awhile such as 30 to 60 minutes before I try to login
to the server I get the same message about security error
and cannot logon even the first time.
Boy am I lost on this one.
 
Back
Top