Conflict of network adapters

  • Thread starter Thread starter Pat
  • Start date Start date
P

Pat

i am runnning windows 2000 web server and i have 2 network
cards in my pc, one for my cable and one for lan, i have
also set up a web server and set it all up correctly but
you are unable to connect to it while the lan connection
is enabled, because wehn i disable to lan you can connect
to it remotley and it all works, can anyone help??
 
You should make sure you have a default gateway only configured on the cable
connection and there should be NO default gateway configured for the LAN.

--

Thanks,
Marc Reynolds
Microsoft Technical Support

This posting is provided "AS IS" with no warranties, and confers no rights.
 
there was no gateway for the lan there was only a ip addr
and a subnet..... and when i go into cable propities there
is no ip or aytnhing, but when i go through cmd.exe and
type ipconfig it brings up the ip and gateway for the
cable.. so im a bit uunsure
 
And also check the bindingorder in Network Connections, Advanced, Advanced,
and make sure the internal nic is on top.
On the external nic only TCP/IP should be bound.
 
thans so much, i dont know if it works, but it sounds
good... i got the basic drift of it but whats a nic?
i did it but just outa curiostity i was wondering wot it
was

-----Original Message-----
And also check the bindingorder in Network Connections, Advanced, Advanced,
and make sure the internal nic is on top.
On the external nic only TCP/IP should be bound.

--
Regards,

Marina

"Marc Reynolds [MSFT]" <[email protected]> schreef in bericht
You should make sure you have a default gateway only
Click to expand...
configured on the
cable
connection and there should be NO default gateway configured for the LAN.

--

Thanks,
Marc Reynolds
Microsoft Technical Support

This posting is provided "AS IS" with no warranties,
Click to expand...
and confers no
rights.

.
Click to expand...
 
Network Interface Connector (?), the network adapter.

--
Regards,

Marina

pat said:
thans so much, i dont know if it works, but it sounds
good... i got the basic drift of it but whats a nic?
i did it but just outa curiostity i was wondering wot it
was

-----Original Message-----
And also check the bindingorder in Network Connections, Advanced, Advanced,
and make sure the internal nic is on top.
On the external nic only TCP/IP should be bound.

--
Regards,

Marina

"Marc Reynolds [MSFT]" <[email protected]> schreef in bericht
You should make sure you have a default gateway only
Click to expand...
configured on the
cable
connection and there should be NO default gateway configured for the LAN.

--

Thanks,
Marc Reynolds
Microsoft Technical Support

This posting is provided "AS IS" with no warranties,
Click to expand...
and confers no
rights.
i am runnning windows 2000 web server and i have 2 network
cards in my pc, one for my cable and one for lan, i have
also set up a web server and set it all up correctly but
you are unable to connect to it while the lan connection
is enabled, because wehn i disable to lan you can connect
to it remotley and it all works, can anyone help??
Click to expand...


.
Click to expand...
Click to expand...
 
Back
Top