Configuration for Toshiba DP5570

  • Thread starter Thread starter Don Argo
  • Start date Start date
D

Don Argo

I have a Toshiba DP5570 with internal NIC and am trying to configure a
Windows 2000 server to print to it. However I am having difficulty
finding documentation for this printer, and honest do not want to pay
$50 for a support call if it is not necessary. Can someone who has
configured this printer give me some advice?

I can ping the printer and when I point a web browser to its address I
get the TOP ACCESS screens showing the printer status. I've
downloaded the drivers from Toshiba's website, and go through the Add
Printer wizard and configure a Standard TCP/IP port using the
printer's IP address (192.168.200.3) and the port name of
IP_192.168.200.3 I get an error about the network setting but leave
it set at RAW, port 9100. No test page prints. I have also tried
setting it to port 10000 and port 10001 with no success.

Any help is appreciated.

Thanks!

Don
 
Answering my own question...

OK, so I called my Toshiba dealer and paid the $50. Hopefully this
will help others who are configuring this printer, and it may work
with other Toshiba network printers/copiers.

Configure the printer using a Standard TCP/IP port, then change the
port type from RAW to LPR, enter an LPR port name of PORT1, and check
the ENABLE BYTE COUNT box.

That should do it.

Don
 
DP5570's IP Configuration?

Don,

Can you provide instructions on how to configure the DP5570's IP Address? We too have a DP5570 and I cannot seem to locate a user manual anywhere. Any help would be greatly appreciated...

Rick Gipson
Technology Consultant
 
Back
Top