Computer won't boot

  • Thread starter Thread starter mszak50
  • Start date Start date
M

mszak50

Hi all -

I have a VPR Matrix FT4100. I installed a new graphics card for my kid,
and the computer won't boot. Replaced the new card with the old card,
still won't boot.

Where do I start ?

Mike
 
Hi
Check all your connections. You might have dislodged something when you
installed the new graphics card. Look especially at the case connection
wires. (power, leds, reset etc.
Check that the graphics card is properly reseated. Sometimes there is a
retaining catch witch must be properly reset before you can put in a new
card.
Merry Christmas
Paul
 
I have a VPR Matrix FT4100. I installed a new graphics card for my
kid, and the computer won't boot. Replaced the new card with the
old card, still won't boot.
Where do I start ?

Start by providing more information, specifically what do you mean
by "the computer won't boot"? Give as much detail as possible
including any error messages verbatim (that means letter for letter
and space for space).

Good luck.
 
Back
Top