Computer won't boot successfully

  • Thread starter Thread starter Terry R
  • Start date Start date
T

Terry R

Upgraded from 98SE to 2000 professional; booted up but was
missing some drivers; searched for,found and installed
some new drivers and now the computer gets caught in a
loop when it tries to start.

Gets to the'starting windows 2000...' window and then
never completes; goes back and starts all over.

Also, still missing VGA/VGA compatible drivers so monitor
is not showing right colors; network adapter incorrect
also, so if anyone can help, please.

Thanks,
tar
 
Save yourself some time and trouble, given that you'll more than likely end
up with an unstable OS with all the remnants/ corruption left behind from
the upgrade. Best to blow it all away and go for the clean install.

To do a clean install, either boot the Windows 2000 CD-Rom or setup disks.
The set of four install disks can be created from your Win2k CD-rom; change
to the \bootdisk directory on the cd-rom and execute makeboot.exe (from dos)
or makebt32.exe (from 32 bit) and follow the prompts.

When you get to the point, delete the existing NTFS and or other partitions
found. After you delete the partition(s) abort the install, then again
restart the pc booting the CD-Rom or setup disks to avoid unexpected drive
letter assignments with your new install.

During Windows 2000 setup, at some point, will want to confirm the previous
operating system for the upgrade; at that point you'll simply insert the
qualified product install CD for it to verify. Then the install will
proceed.

Check the pc, mb or hardware manufacturer's web site for the latest bios and
or Windows 2000 drivers for your devices.


--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft MVP [Windows NT/2000 Operating Systems]
http://www.microsoft.com/protect.

:
| Upgraded from 98SE to 2000 professional; booted up but was
| missing some drivers; searched for,found and installed
| some new drivers and now the computer gets caught in a
| loop when it tries to start.
|
| Gets to the'starting windows 2000...' window and then
| never completes; goes back and starts all over.
|
| Also, still missing VGA/VGA compatible drivers so monitor
| is not showing right colors; network adapter incorrect
| also, so if anyone can help, please.
|
| Thanks,
| tar
 
Back
Top