Computer Halt and goes Blue Screen

  • Thread starter Thread starter Artificer
  • Start date Start date
A

Artificer

I have a computer that has been working just fine for more than a
year. Now 2 weeks ago it after a couple of minutes of using it halts
and after 2 or 3 minutes goes to blue screen with the following error:

Error code 100000d1, parameter1 00000081, parameter2 00000002,
parameter3 00000000, parameter4 823cbec0.

The funny thing is that it does not happen always. Some days it works
just fine but others it just halt every time I start it. I tried with
several antivirus software and nothing was found I also tried looking
for a hardware conflict but I was unable to find any. At this point I
really don't know what else to try!
 
Background information on Stop Error message:
http://msdn2.microsoft.com/en-us/library/ms795930.aspx

0x000000D1: DRIVER_IRQL_NOT_LESS_OR_EQUAL
(The system attempted to access pageable memory using a kernel process
IRQL that was too high. The most typical cause is a bad device driver
(one that uses improper addresses). It can also be caused by caused by
faulty or mismatched RAM, or a damaged pagefile.
Source: http://aumha.org/a/stop.htm

Test your RAM
http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

Are there any yellow question marks in Device Manager? Right click on
the My Computer icon on your Desktop and select Properties,
Hardware,Device Manager. If yes what is the Device Error code?

Try Start, Run, type "sigverif.exe" without quotes and hit OK. What
drivers are listed as unsigned? Disregard those which are not checked.

Please post copies of all Error and Warning Reports appearing in
the System and Application logs in Event Viewer for the last boot. No
Information Reports or Duplicates please. Indicate which also appear in
a previous boot.

You can access Event Viewer by selecting Start, Control Panel,
Administrative Tools, and Event Viewer.

A tip for posting copies of Error Reports! Run Event Viewer and double
click on the error you want to copy. In the window, which appears is a
button resembling two pages. Click the button and close Event
Viewer.Now start your message (email) and do a paste into the body of
the message. Make sure this is the first paste after exiting from
Event Viewer.

--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
 
Back
Top