Computer constantly restarts.

  • Thread starter Thread starter twisztad
  • Start date Start date
T

twisztad

HI I have this problem, My pc constantly restarts. totally randomly.
First I have a p4 3.06 ghz. I installed a Gigabyte Rocket Cooler Pro.
The Cpu got stuck to the old stock fan and when i removed it I bent A
few pins, I tried long and hard to bend the pins back, and was
successfull. Inserted the cpu and new fan and everything works fine.
I bought myself A new case CM Stacker transplanted my mobo over and
reconnected everything, but now my pc is restarting constantly, I
really want to know what could the problem be. Reinstalled Xp and
takes longer to restart now, but still restarts. I am dying here
could I have damage my cpu behond repair. Also A little thermal paste
went onto the pins, I couldnt remove it,for fear of damaging the pins
again, I am desperate, please help.

P.s. I suppose it is hardware for sure now, Checked out my ram using
memtest - no errors. I am monitoring my Cpu temp using motherboard
monitor, but here is where it gets funny, it shows that my cpu temp
is 32c idle, Use Gigabyte easy tune to check cpu temp aswell, shows
same thing. Then when I use Fresh Diagnose to check CPU temp it shows
90c and all of a sudden the temps on Easy tune and Motherboard monitor
jump up to 77c, wat the hell is this about, then when a close all
these programs and restart easy tune and motherboard monitor it shows
32c again. I dont know which one to believe. Oh and I check out my Cpu
There is some thermal paste at the bottom on some of the pins but not
allot, Could this be shorting out the Cpu.
 
twisztad said:
There is some thermal paste at the bottom on some of the pins but not
allot, Could this be shorting out the Cpu.
Click to expand...

Silver-based thermal compounds can cause some electronic problems for CPUs.
 
twisztad said:
HI I have this problem, My pc constantly restarts. totally randomly.
First I have a p4 3.06 ghz. I installed a Gigabyte Rocket Cooler Pro.
The Cpu got stuck to the old stock fan and when i removed it I bent A
few pins, I tried long and hard to bend the pins back, and was
successfull. Inserted the cpu and new fan and everything works fine.
I bought myself A new case CM Stacker transplanted my mobo over and
reconnected everything, but now my pc is restarting constantly, I
really want to know what could the problem be. Reinstalled Xp and
takes longer to restart now, but still restarts. I am dying here
could I have damage my cpu behond repair. Also A little thermal paste
went onto the pins, I couldnt remove it,for fear of damaging the pins
again, I am desperate, please help.
Click to expand...

Your system is set to restart on errors by default upon installation. These
errors are usually driver glitches. To get rid of this phenomena,
right-click on My Computer and choose Properties. Now, navigate to the
Advanced tab and under Startup and Recovery, click on the Settings button.
Now, under System Failure, there is a checkbox for Automatically Restart.
Uncheck it and click Ok. You're done.
 
Ruel Smith said:
Your system is set to restart on errors by default upon installation. These
errors are usually driver glitches. To get rid of this phenomena,
right-click on My Computer and choose Properties. Now, navigate to the
Advanced tab and under Startup and Recovery, click on the Settings button.
Now, under System Failure, there is a checkbox for Automatically Restart.
Uncheck it and click Ok. You're done.
Click to expand...
What PSU, make and rating? What video card? How much memory, what make
and speed? Fault described can be dodgy PSU or memory.
Mike.
 
If excessive thermal compound was applied that it squeezed
out the side, then you have created temperature problems. Of
course any thermal compound touching pins means compound is
conducting electricity from those pins. So you also have an
electrical problem.

The system is restarting for good reasons. You are then
expected to review information sources, such as the history
log, to learn why problems are happening. What does Device
Manager report? What does the system (event) log report? If
necessary, go to Windows HELP to learn how to find these
important numbers and reports. You need those facts first to
ask for help (and get a useful reply).

In the meantime if a system vendor is responsible, then he
provided comprehensive hardware diagnostics, for free, either
with the system or on the web site. If your's is from a less
than responsible vendor, then you must download each
individual hardware diagnostic and execute them - to first
verify hardware integrity. You do this long before even
trying to 'fix' Windows.

Memtest will not always report bad memory is you leave
memory at room temperature. IOW redo the same test with
memory heated to temperatures that are uncomfortable to touch
but does not leave skin. IOW heat memory with a hairdryer on
high (which is still well below what memory might consider a
maximum normal temperature) and then retest memory. Heat is a
diagnostic tool that is especially good at locating defective
memory when used in conjunction with comprehensive hardware
diagnostics.

Also necessary are voltages from power supply using a 3.5
digit multimeter. It says multimeter - not motherboard
monitor - for good reason. Your numbers must reside in the
upper 3/4 limits of the charts provide in these previous
discussions: "Computer doesnt start at all" in
alt.comp.hardware on 10 Jan 2004 at
http://tinyurl.com/2t69q and
"I think my power supply is dead" in alt.comp.hardware on 5
Feb 2004 at
http://www.tinyurl.com/2musa .

When an Intel CPU overheats, it does not crash. It simply
slows down. IOW ignore any suggestion that you have a heat
problem. Heat is what the naive immediately blame having
never learned to first obtain basic facts. Above are the
first basic facts necessary.

But right off we have the obvious. You have thermal
compound on the pins. Therefore you have created electrical
problems. Furthermore, the thermal compound should be applied
so stingy that is only spreads out on the inner half of that
CPU. Thermal compound on the outer half does nothing useful
and is often an indication of way too much thermal compound
causing diminished thermal conductivity - and in your case,
electrical problems.
 
The vendors warned about this problem early this year.
What they warned about was when you get a new mobo,
be sure to pull the fan off the cpu and use new thermal
paste. The old paste tends to dry over time, and once
you start running the cpu, the heat will cause the paste
to stick the cpu to the fan so you can't get to the release
lever to remove the cpu. When that happens, and you
try to pull the fan-cpu combo out, you damage the
socket itself. Straightening the pins on the cpu tells me
that you also damaged the mobo socket. I don't know
what kind of damage the vendors say happens, but
I suspect it may be the socket pins that are soldered
to the mobo. Maybe some of them break ?? Anyway,
looks like you may be in for new mobo-cpu bundle.
Thermal paste on the pins would not affect anything
unless there was a lot of it. Note: y'all !!! This warning
was aimed specifically at the AMD64. Absolutely
don't ignore this warning if you buy a new AMD64.

johns
 
Back
Top